Hình ảnh chỉ để tham khảo
MX25R8035FBDIL0
+BOMIC FLASH 8MBIT SPI/QUAD 8WLCSP
-
Nhà sản xuấtMacronix
-
Ông. Phần #MX25R8035FBDIL0
-
Có sẵn7141
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Series | MXSMIO™ |
| Part Status | Not For New Designs |
| Base Product Number | MX25R8035 |
| DigiKey Programmable | Not Verified |
| Memory Type | Non-Volatile |
| Memory Format | FLASH |
| Technology | FLASH - NOR |
| Memory Size | 8Mbit |
| Memory Organization | 1M x 8 |
| Memory Interface | SPI - Quad I/O |
| Clock Frequency | 33 MHz |
| Write Cycle Time - Word, Page | 100µs, 10ms |
| Voltage - Supply | 1.65V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Package | 8-UFBGA, WLCSP |
| Supplier Device Package | 8-WLCSP |
| Packaging | Tape & Reel (TR) |
Tổng quan
Description
- Interface: Serial SPI (standard read, fast read; many MX25R parts also support dual/quad I/O modes)
- Capacity: ~8 Mb (1 MB) of nonvolatile flash
- Voltage: 2.7–3.6 V
- Temperature: Industrial range (-40°C to 85°C) as indicated by IL0
- Organization: 256-byte pages; sectors/blocks erase (typical 4 KB/32 KB/64 KB blocks)
- Features: Write enable/disable, status register, deep power-down, etc.
- Packaging: 8-pin package suitable for standard PCB footprints
用途: firmware boot code storage, data logging, and other code/data storage in embedded systems.
For exact timing, command set, and electrical specs, refer to the official MX25R8035FBDIL0 datasheet and product page.
Equivalent
- Winbond W25Q80DV/BV
- GigaDevice GD25Q80B
- Macronix MX25L8035F (MX25R8035F family)
- Micron N25Q80A
- Spansion S25FL008K
- ST M25P80
- ISSI IS25LP080D
- Puya P25Q80H
Features
- Density: 8 Mbit (1 MB) non-volatile Flash
- Interface: SPI with support for standard SPI, Dual I/O, and Quad I/O (QPI)
- Voltage: 2.7–3.6 V
- Package: 8‑pin, DIL/SOIC style
- Memory organization: 256‑byte pages; 4 KB sectors, 32 KB and 64 KB blocks; bulk erase
- Performance: fast read modes via SPI/Dual/Quad I/O
- Security: hardware write protection, block protection (BP) bits, OTP/configuration/status registers, Quad Enable as needed
- Power: Deep power-down and low active current modes
- Temperature: Industrial range, −40 °C to 85 °C
- Endurance/Retention: ~100k P/E cycles per sector; data retention typically ~20 years
- Compliance: JEDEC standard, supports status/config registers and ID read
Note: consult the datasheet for exact timing and mode details.
Pinout
- Function: Macronix MX25R8035FBDIL0 is an SPI serial flash memory device (non-volatile storage) used to store firmware/data. It provides a 4‑wire SPI interface (CLK, CS, MOSI, MISO) plus WP and HOLD pins, with VCC and GND.
Manufacturer
- Company type: Taiwan-based semiconductor company and an integrated device manufacturer (IDM) that designs and fabricates non-volatile memory products (e.g., serial NOR/NAND flash).
Application
- Firmware storage and boot memory for microcontrollers/SoCs
- Code and data storage in embedded devices (consumer electronics, wearables, cameras, set-top boxes)
- IoT devices for firmware updates and non-volatile configuration data
- Automotive and industrial control/instrumentation requiring rugged, reliable memory
- Networking equipment (routers, switches) for firmware and configuration storage
- Data logging and storage of lookup tables/static data in industrial systems
Note: supports dual/quad SPI interfaces for faster programming and operation.
Package
Frequently Asked Questions
Q: What is the memory density and organization of the MX25R8035FBDIL0?
A: It is an 8Mbit NOR Flash memory, organized as 1M x 8 bits, suitable for code storage and data logging.
Q: What voltage range does this Flash memory support?
A: It operates from 1.65V to 3.6V, enabling compatibility with low-voltage and standard logic designs.
Q: Is this component suitable for new designs?
A: No, Macronix lists its part status as "Not For New Designs," meaning it is intended for existing production or legacy support.
Q: What is the maximum clock frequency for SPI operations?
A: The clock frequency is 33 MHz, supporting fast read and program operations via SPI or Quad I/O interfaces.
Q: What memory interface does the MX25R8035FBDIL0 use?
A: It uses SPI with Quad I/O support, allowing for enhanced throughput in serial communication.
Q: What are the write cycle times for this chip?
A: Word write is 100µs, and page write is 10ms, ensuring efficient programming for non-volatile storage.
Q: What is the operating temperature range?
A: It operates between -40°C to +85°C, making it suitable for industrial and commercial environments.
Q: What package type is available for this part?
A: It comes in an 8-UFBGA, WLCSP package (8-WLCSP), ideal for space-constrained surface-mount designs.
