MX29F800CTTI-70G

Hình ảnh chỉ để tham khảo

MX29F800CTTI-70G

+BOM

IC FLASH 8MBIT PARALLEL 48TSOP

  • Nhà sản xuấtMacronix

  • Ông. Phần #MX29F800CTTI-70G

  • Có sẵn7237

365 Đảm bảo chất lượng ngày

7*24 giờ dịch vụ quarantee

90-Bảo hành sau bán hàng ngày

Bảo hành sản phẩm chính xác

Thông số kỹ thuật

thuộc tính Giá trị
Series MX29F
Part Status Active
Base Product Number MX29F800
Digi Key Programmable Not Verified
Memory Type Non-Volatile
Memory Format FLASH
Technology FLASH - NOR
Memory Size 8Mbit
Memory Organization 1M x 8
Memory Interface Parallel
Write Cycle Time - Word, Page 70ns
Voltage - Supply 4.5V ~ 5.5V
Operating Temperature -40°C ~ 85°C (TA)
Mounting Type Surface Mount
Package / Case 48-TFSOP (0.724", 18.40mm Width)
Supplier Device Package 48-TSOP
Packaging Tray
Access Time 70 ns

Tổng quan

Description

MX29F800CTTI-70G is Macronix’s 8‑Mbit parallel NOR flash memory. It is designed to store firmware and code data for embedded systems and microcontrollers, often as a drop‑in replacement for mask ROM or external boot code.
Key points:
- Capacity and width: 8 Mbit (1 MB); data can be accessed in x8 (and x16 in some configurations) modes.
- Interface and timing: parallel NOR flash with a standard asynchronous read/write/erase command set; 70 ns read access time (speed grade).
- Voltage: typically operates from 3.0–3.6 V (commonly 3.3 V systems).
- Organization: commonly organized as 1,048,576 × 8; supports block/sector erase and programming.
- Package: available in Macronix CTTI packaging variant (specific packaging can vary by lot).
- Applications: boot firmware, code storage for embedded MCUs, firmware updates.
Considerations:
- Plan erase/program cycles (endurance ~10^4–10^6 cycles depending on conditions).
- Use the datasheet for exact command sequences, block sizes, and timing.

Equivalent

MX29F800CTTI-70G is Macronix 8-Mbit, 5V NOR flash, 70 ns, TSOP-32 (CTTI). There is no universal 1:1 cross. Equivalent parts from other vendors exist for similar specs (8-Mbit, 70 ns NOR flash). To give precise substitutes, please confirm voltage (5V/3.3V) and package (TSOP32/PLCC32). I can then provide exact cross-reference part numbers from Winbond, Spansion/Cypress, ISSI, etc.

Features

Here are the main features of MX29F800CTTI-70G (Macronix 8-Mbit NOR Flash):
- Memory: 8 Mbit NOR flash
- Speed: 70 ns random access read
- Voltage: 5V single-supply operation (typical 4.5–5.5V)
- Interface: Parallel 8-bit data bus
- Operations: Read, program (word/byte), erase
- Erase/Program: Block/sector erase and byte/word programming with standard command set
- Endurance: Typically ~100,000 program/erase cycles
- Data retention: ≥10 years
- Packaging: CTTI-70G (industrial packaging variant)
Note: exact block sizes, temperature range, and additional mode details are specified in the full datasheet.

Pinout

- Pin count: 32 pins (32‑pin TSOP/SOP package)
- Function: 8‑Mbit parallel NOR flash memory (MX29F800CTTI-70G), 3.0V operation, 70 ns access. Provides 8‑bit data I/O (DQ0–DQ7), address inputs (A0…), and control pins CE#, OE#, WE#, plus Vcc and Vss. Used for non-volatile storage/firmware.

Manufacturer

Manufacturer: Macronix International Corp., Ltd. (MXIC).
Company type: A Taiwan-based semiconductor company that designs and manufactures non-volatile memory ICs, including NOR and NAND flash and ROM, for embedded systems, consumer electronics, and automotive applications.

Application

MX29F800CTTI-70G is an 8-Mbit NOR flash memory used for non-volatile program storage in embedded systems. Typical applications:
- Boot ROM and firmware storage for microcontrollers/DSPs
- Firmware updates
- Consumer electronics (set-top boxes, DVD players, cameras, printers)
- Automotive ECUs and infotainment
- Industrial controls and PLCs
- Networking hardware (routers/switches)
- Medical devices requiring reliable firmware storage
(70G signifies speed grade; CT-TI packaging variant.)

Package

MX29F800CTTI-70G comes in a 48‑pin TSOP II plastic package.

Frequently Asked Questions


Q: What is the memory density and organization of the MX29F800CTTI-70G?
A: It has an 8Mbit density organized as 1M x 8 bits, suitable for byte-wide parallel data access.


Q: What is the access time and operating voltage for this NOR Flash?
A: Access time is 70 ns, and the supply voltage range is 4.5V to 5.5V, typical for 5V parallel Flash.


Q: Is this component suitable for industrial temperature applications?
A: Yes, it operates from -40°C to +85°C, making it ideal for industrial and automotive environments.


Q: What is the memory interface type and programming speed?
A: It uses a parallel interface with a 70ns write cycle time per word or page, ensuring fast data writing.


Q: Is the MX29F800CTTI-70G a surface mount device, and what is its package?
A: Yes, it is surface mount in a 48-TFSOP (18.40mm width) package, with the supplier device package being 48-TSOP.


Q: Is this Flash memory non-volatile and does it retain data without power?
A: Yes, it is a non-volatile NOR Flash memory, retaining stored data even when power is removed.


Sản phẩm liên quan đến MX29F800CTTI-70G