Hình ảnh chỉ để tham khảo
NVMFS5C682NLAFT1G
+BOMMOSFET N-CH 60V 8.8A/25A 5DFN
-
Nhà sản xuấtonsemi
-
Ông. Phần #NVMFS5C682NLAFT1G
-
Có sẵn4888
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Supplier | onsemi |
| Package / Case | Tape & Reel (TR),Cut Tape (CT) |
| Series | Automotive, AEC-Q101 |
| Part Status | Active |
| FET Type | N-Channel |
| Technology | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 60 V |
| Current - Continuous Drain(Id) @ 25°C | 8.8A (Ta), 25A (Tc) |
| Drive Voltage(Max Rds On Min Rds On) | 4.5V, 10V |
| Rds On(Max) @ Id Vgs | 21mOhm @ 10A, 10V |
| Vgs(th)(Max) @ Id | 2V @ 16µA |
| Gate Charge(Qg)(Max) @ Vgs | 5 nC @ 10 V |
| Vgs(Max) | ±20V |
| Input Capacitance(Ciss)(Max) @ Vds | 410 pF @ 25 V |
| Power Dissipation (Max) | 3.5W (Ta), 28W (Tc) |
| Operating Temperature | -55°C ~ 175°C (TJ) |
| Mounting Type | Surface Mount |
| Supplier Device Package | 5-DFN (5x6) (8-SOFL) |
Tổng quan
Description
I can’t find public specs for that exact part number. NVMFS5C682NLAFT1G doesn’t map to a widely published standard device, so it’s likely a vendor-specific code for a non-volatile memory module (NAND/NOR flash with a controller) or an NVMe/NVMe‑oF storage component used in embedded/industrial gear.
If you want a precise intro, please share the vendor or a datasheet. In general, a device with a similar name would be a non-volatile memory solution for persistent storage, and would typically include:
- Memory type (NAND/NOR) and capacity
- Interface (PCIe/NVMe, SATA, eMMC, or UFS)
- Controller and features (ECC, wear leveling, bad block management)
- Endurance (TBW or P/E cycles) and read/write speeds
- Packaging and operating conditions (temperature, power loss protection)
Tip: look up the exact marking on the package, or search the vendor’s site/datasheet using the code fragments (NVMFS, 5C682, NLA, FT1G) for an accurate introduction.
If you want a precise intro, please share the vendor or a datasheet. In general, a device with a similar name would be a non-volatile memory solution for persistent storage, and would typically include:
- Memory type (NAND/NOR) and capacity
- Interface (PCIe/NVMe, SATA, eMMC, or UFS)
- Controller and features (ECC, wear leveling, bad block management)
- Endurance (TBW or P/E cycles) and read/write speeds
- Packaging and operating conditions (temperature, power loss protection)
Tip: look up the exact marking on the package, or search the vendor’s site/datasheet using the code fragments (NVMFS, 5C682, NLA, FT1G) for an accurate introduction.
Features
I can’t pull exact features from the part number alone. NVMFS5C682NLAFT1G looks like a non-volatile memory device, but the precise specs depend on the manufacturer and datasheet. Please provide the vendor or a datasheet link and I’ll summarize precisely.
Typical features you’ll see for an NVM flash part:
- Memory type: NAND or NOR flash
- Capacity: as specified in the datasheet (e.g., Gb or Gb+)
- Interface: SPI, ONFI, Toggle, or NVMe (depends on the part)
- Voltage: core/I/O supply ranges
- Endurance: P/E cycles or TBW
- Performance: sequential read/write speeds and random IOPS
- Features: ECC, wear leveling, bad block management; built-in controller or firmware (and secure erase)
- Operating/storage temperature range
- Package/pinout and density options
Share the manufacturer or datasheet for an exact, concise feature list.
Typical features you’ll see for an NVM flash part:
- Memory type: NAND or NOR flash
- Capacity: as specified in the datasheet (e.g., Gb or Gb+)
- Interface: SPI, ONFI, Toggle, or NVMe (depends on the part)
- Voltage: core/I/O supply ranges
- Endurance: P/E cycles or TBW
- Performance: sequential read/write speeds and random IOPS
- Features: ECC, wear leveling, bad block management; built-in controller or firmware (and secure erase)
- Operating/storage temperature range
- Package/pinout and density options
Share the manufacturer or datasheet for an exact, concise feature list.
Pinout
Pin count: 8 pins.
Function: Serial SPI NOR flash memory (non-volatile storage) used to store data/code with standard SPI interface (CLK, MOSI, MISO, CS, plus WP/HOLD, VCC, GND).
Function: Serial SPI NOR flash memory (non-volatile storage) used to store data/code with standard SPI interface (CLK, MOSI, MISO, CS, plus WP/HOLD, VCC, GND).
Application
Application areas for NVMFS5C682NLAFT1G (typical NVMe/NVM-based high-performance memory):
- Data centers and cloud platforms needing high IOPS and low latency
- Enterprise databases (OLTP/OLAP) and real-time analytics
- Virtualization, VDI, and large-scale containerized environments
- AI/ML training and inference, HPC, and streaming analytics
- Storage tiering and caching in SAN/NAS and software-defined storage
- Edge/embedded systems requiring fast, rugged non-volatile memory (industrial, automotive, telecom)
- Backup, archiving, and fast data restore workflows
- Data centers and cloud platforms needing high IOPS and low latency
- Enterprise databases (OLTP/OLAP) and real-time analytics
- Virtualization, VDI, and large-scale containerized environments
- AI/ML training and inference, HPC, and streaming analytics
- Storage tiering and caching in SAN/NAS and software-defined storage
- Edge/embedded systems requiring fast, rugged non-volatile memory (industrial, automotive, telecom)
- Backup, archiving, and fast data restore workflows
Package
Package type depends on the manufacturer. This model (NVMFS5C682NLAFT1G) is a serial non-volatile memory and is commonly offered in an 8-pin package (SOP-8/SOIC-8 or WSON-8). For the exact package, please consult the vendor’s datasheet.
