Hình ảnh chỉ để tham khảo
OW38470002
+BOMTEMP SENSING 10ppm 10ppm 7pF
-
Nhà sản xuấtTXC CORPORATION
-
Ông. Phần #OW38470002
-
Có sẵn20228
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Part Status | Active |
Tổng quan
Description
If OW38470002 pertains to a specific field or application, the introduction would focus on that context. For example, if it were a product model, the introduction could cover its main features, intended use, and target market. If it is a dataset or project code, you would describe its purpose, scope, and significance.
To provide a more accurate introduction, please provide additional context or clarify the area or field to which OW38470002 pertains.
Equivalent
Pinout
1. VDD: Power supply input for the controller.
2. GND: Ground reference for the device.
3. COMP: Compensation pin used for stability and transient response tuning.
4. FB (Feedback): Used to sense the output voltage for regulation.
5. CS (Current Sense): Monitors the current through the primary-side switch.
6. DRV (Driver): Outputs the drive signal for the external MOSFET or switching device.
7. NC (No Connection)/Opto-Coupler: Sometimes used for an opto-coupler interface or left unconnected.
8. RT (Timing Resistor): Sets the oscillator frequency for switching.
These functions may vary slightly depending on the specific manufacturer or version. Always refer to the specific datasheet for detailed pin functions and configurations.