Hình ảnh chỉ để tham khảo
RTL8192ER-CG
+BOM-
Nhà sản xuấtRealtek Semicon
-
Ông. Phần #RTL8192ER-CG
-
Có sẵn24398
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Manufacturer | Realtek Semicon |
| Package | QFN-56 |
Tổng quan
Description
- 2.4 GHz operation with support for 150 Mbps PHY rate (MIMO 1x1).
- PCIe interface for easy integration into laptops, routers, and embedded systems.
- Low power consumption, making it suitable for portable devices.
- Advanced security (WPA/WPA2, WEP, AES encryption).
- Linux/Windows driver support for broad compatibility.
Commonly used in Wi-Fi modules, USB dongles, and IoT devices, the RTL8192ER-CG balances performance and cost-effectiveness for basic wireless connectivity.
Equivalent
- RTL8192EU: Similar 802.11n performance, USB interface.
- RTL8192CE: PCIe interface, older but comparable.
- Broadcom BCM4322: Competing 802.11n chip.
- Atheros AR9280: Comparable performance, often used in similar applications.
These chips offer similar 2.4GHz Wi-Fi 4 functionality but may differ in interfaces (USB/PCIe) or driver support.
Features
- Standards: IEEE 802.11b/g/n (2.4GHz only).
- Speed: Up to 300 Mbps (MIMO 2x2, 40MHz bandwidth).
- Interface: PCIe 1.1 for host connectivity.
- Security: WPA/WPA2, WEP, AES/TKIP encryption.
- Advanced Features:
- Supports AP/STA modes.
- Low-power design with PS (Power Saving) modes.
- Integrated LNA/PA for improved signal range.
- Compatibility: Works with Windows/Linux drivers.
Ideal for embedded systems, routers, and PCIe Wi-Fi adapters.
Pinout
- Wireless Connectivity: Supports 802.11b/g/n (2.4GHz) with a max data rate of 150Mbps (1T1R).
- Interfaces:
- SDIO (for host communication)
- USB 2.0 (optional, depending on variant)
- GPIOs (for control/status)
- Power Management: Integrated LDOs for efficient power handling.
- RF Integration: On-chip PA (Power Amplifier) and LNA (Low-Noise Amplifier).
Pins are allocated for power (VDD), ground (GND), RF signals (antenna I/O), and control lines (reset, clock). Exact pinout details should be checked in the datasheet due to variations.