Thông số kỹ thuật
| thuộc tính | Giá trị |
| Package | Tape & Reel (TR) |
| ProductStatus | Active |
Tổng quan
Description
The SMCJ24A is a type of transient voltage suppressor (TVS) diode, specifically designed for protecting sensitive electronic components from voltage spikes and transients. It is part of the SMCJ series, which is known for its ability to handle high surge currents and voltage transients typically caused by lightning strikes, electrical load switching, or electrostatic discharge (ESD).
Key features of the SMCJ24A include a breakdown voltage of approximately 24 volts, a peak pulse power capability of 1500 watts for a 10/1000 μs waveform, and a fast response time, typically in the nanosecond range. It is designed to clamp voltages and prevent them from exceeding a safe threshold, thereby protecting downstream components.
The device is commonly used in power supply lines, communication systems, and other electronic devices where voltage regulation and surge protection are critical. It is packaged in a surface-mount configuration, making it suitable for use in compact and densely populated circuit boards. The SMCJ24A is widely adopted in various industrial, automotive, and consumer electronics applications.
Key features of the SMCJ24A include a breakdown voltage of approximately 24 volts, a peak pulse power capability of 1500 watts for a 10/1000 μs waveform, and a fast response time, typically in the nanosecond range. It is designed to clamp voltages and prevent them from exceeding a safe threshold, thereby protecting downstream components.
The device is commonly used in power supply lines, communication systems, and other electronic devices where voltage regulation and surge protection are critical. It is packaged in a surface-mount configuration, making it suitable for use in compact and densely populated circuit boards. The SMCJ24A is widely adopted in various industrial, automotive, and consumer electronics applications.
Equivalent
The SMCJ24A is a Transient Voltage Suppressor (TVS) diode. Equivalent products include the P6SMB24A, 1.5SMC24A, SMBJ24A, and SMCG24A. These components typically share similar specifications in terms of breakdown voltage and power dissipation. Always verify the specific requirements of your application, as equivalent parts may have slight variations in packaging, power handling, or other characteristics.
Features
The SMCJ24A is a Transient Voltage Suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage spikes and electrostatic discharge. Here are its key features:
1. Peak Power Dissipation: Capable of handling 1500 watts of peak pulse power dissipation on a 10/1000 μs waveform, making it suitable for high-power applications.
2. Reverse Stand-Off Voltage: It has a reverse stand-off voltage of 24 volts, ensuring the device remains inactive under normal voltage conditions while activating during overvoltage events.
3. Breakdown Voltage: The breakdown voltage ranges from 26.7 to 29.5 volts, which is the voltage at which the diode begins to conduct in reverse to clamp transient voltages.
4. Response Time: Provides fast response time, typically less than 1 picosecond, enabling rapid protection against voltage spikes.
5. Package: Available in an SMC package, which is compact and surface-mountable, facilitating easy integration into circuit designs.
6. Polarity: Unidirectional design ensures that it only conducts during negative-to-positive voltage spikes.
These features make the SMCJ24A TVS diode suitable for use in protecting a wide range of electronic circuits from transient voltage events.
1. Peak Power Dissipation: Capable of handling 1500 watts of peak pulse power dissipation on a 10/1000 μs waveform, making it suitable for high-power applications.
2. Reverse Stand-Off Voltage: It has a reverse stand-off voltage of 24 volts, ensuring the device remains inactive under normal voltage conditions while activating during overvoltage events.
3. Breakdown Voltage: The breakdown voltage ranges from 26.7 to 29.5 volts, which is the voltage at which the diode begins to conduct in reverse to clamp transient voltages.
4. Response Time: Provides fast response time, typically less than 1 picosecond, enabling rapid protection against voltage spikes.
5. Package: Available in an SMC package, which is compact and surface-mountable, facilitating easy integration into circuit designs.
6. Polarity: Unidirectional design ensures that it only conducts during negative-to-positive voltage spikes.
These features make the SMCJ24A TVS diode suitable for use in protecting a wide range of electronic circuits from transient voltage events.
Pinout
The SMCJ24A is a unidirectional transient voltage suppressor (TVS) diode designed to protect sensitive electronics from voltage spikes and transient events. It typically comes in a DO-214AB (SMC) package and has two pins:
1. Anode (Pin 1): Connects to the positive or ground side of the circuit depending on the application.
2. Cathode (Pin 2): Marked with a band on the component and connects to the line needing protection.
The primary function of the SMCJ24A is to clamp excessive transient voltages to a safe level, thus protecting downstream components in electronic circuits. It is designed to handle peak pulse power dissipation of 1500 watts (10/1000μs waveform) and has a reverse standoff voltage of 24V, with a breakdown voltage range typically between 26.7V and 29.5V. This component is commonly used in data lines, power supplies, and other applications requiring surge protection.
1. Anode (Pin 1): Connects to the positive or ground side of the circuit depending on the application.
2. Cathode (Pin 2): Marked with a band on the component and connects to the line needing protection.
The primary function of the SMCJ24A is to clamp excessive transient voltages to a safe level, thus protecting downstream components in electronic circuits. It is designed to handle peak pulse power dissipation of 1500 watts (10/1000μs waveform) and has a reverse standoff voltage of 24V, with a breakdown voltage range typically between 26.7V and 29.5V. This component is commonly used in data lines, power supplies, and other applications requiring surge protection.
Manufacturer
The SMCJ24A is manufactured by Littelfuse, Inc. Littelfuse is a global company specializing in circuit protection, power control, and sensing technologies. They provide a wide range of products including fuses, semiconductors, and other electronic components used across various industries such as automotive, industrial, electronics, and telecommunications. Littelfuse is well-regarded for its innovations in safety and protection solutions, ensuring the reliability and efficiency of electrical systems.
Application
The SMCJ24A is a Transient Voltage Suppressor (TVS) diode designed to protect sensitive electronic equipment from voltage transients induced by lightning, power surges, and other transient voltage events. Its application areas include:
1. Telecommunication Equipment: Protects communication lines and equipment from voltage spikes.
2. Industrial Electronics: Shields industrial control systems from electrical noise and surges.
3. Consumer Electronics: Safeguards devices like TVs, computers, and home appliances.
4. Automotive Electronics: Guards automotive circuits against load dump and other transient voltage events.
5. Power Supplies: Ensures the stability of power supply circuits by clamping over-voltage events.
These applications help enhance the reliability and longevity of electronic systems.
1. Telecommunication Equipment: Protects communication lines and equipment from voltage spikes.
2. Industrial Electronics: Shields industrial control systems from electrical noise and surges.
3. Consumer Electronics: Safeguards devices like TVs, computers, and home appliances.
4. Automotive Electronics: Guards automotive circuits against load dump and other transient voltage events.
5. Power Supplies: Ensures the stability of power supply circuits by clamping over-voltage events.
These applications help enhance the reliability and longevity of electronic systems.
Package
The SMCJ24A is packaged in a DO-214AB (SMC) surface-mount package. This package type is commonly used for transient voltage suppression diodes, providing reliable protection in a compact form factor for circuit applications.
