Hình ảnh chỉ để tham khảo
SN65HVD06D
+BOMIC TRANSCEIVER HALF 1/1 8SOIC
-
Nhà sản xuấtTexas Dụng cụ
-
Ông. Phần #SN65HVD06D
-
Có sẵn4844
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Supplier | Rochester Electronics, LLC,Texas Instruments |
| Package | Bulk,Tube |
| ProductStatus | Active |
| Type | Transceiver |
| Protocol | RS422, RS485 |
| NumberofDrivers/Receivers | 1/1 |
| Duplex | Half |
| ReceiverHysteresis | 35 mV |
| DataRate | 10Mbps |
| Voltage-Supply | 4.5V ~ 5.5V |
| OperatingTemperature | -40°C ~ 85°C |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.154, 3.90mm Width) |
Tổng quan
Description
SN65HVD06D is Texas Instruments’ high‑speed CAN transceiver. It sits between a CAN controller (TXD/RXD) and the CAN bus (CANH/CANL), converting controller signals to differential bus signals and vice versa.
Key points:
- Power: single-supply 4.5–5.5 V, supports up to 1 Mbps CAN data rate
- Protection: ESD, short-circuit protection on CANH/CANL, undervoltage and fault handling
- Behavior: provides a defined recessive state (failsafe RxD) when the bus is idle or open
- Packaging: available in 8-pin packages (D suffix indicates a specific package/packaging)
Common use: automotive and industrial applications with CAN controllers (e.g., MCP2515) to connect microcontrollers to the CAN network.
Key points:
- Power: single-supply 4.5–5.5 V, supports up to 1 Mbps CAN data rate
- Protection: ESD, short-circuit protection on CANH/CANL, undervoltage and fault handling
- Behavior: provides a defined recessive state (failsafe RxD) when the bus is idle or open
- Packaging: available in 8-pin packages (D suffix indicates a specific package/packaging)
Common use: automotive and industrial applications with CAN controllers (e.g., MCP2515) to connect microcontrollers to the CAN network.
Equivalent
SN65HVD06D is TI’s RS-485/RS-422 half‑duplex transceiver. Equivalents (RS‑485/RS‑422, similar specs) include:
- TI: SN75176B (older), SN65HVD06 (same family)
- Maxim: MAX485, MAX487
- Analog Devices: ADM485
- Linear/Analog: LTC2862, LTC2873
These are common cross‑references for similar transceivers.
- TI: SN75176B (older), SN65HVD06 (same family)
- Maxim: MAX485, MAX487
- Analog Devices: ADM485
- Linear/Analog: LTC2862, LTC2873
These are common cross‑references for similar transceivers.
Features
Here are the typical features of SN65HVD06D (TI RS-485 transceiver):
- 2-wire, half‑duplex RS-485 transceiver (one driver, one receiver)
- 3-state outputs with separate enable inputs (DE for driver, RE for receiver)
- Fail-safe receiver: RO outputs a logic‑high when inputs are open, idle, or shorted
- Wide bus input/common-mode range on A/B lines; robust protection on I/O pins
- High-speed operation (data rates in tens of Mbps; typical around 40 Mbps)
- ESD and fault protection on the bus pins
- Suitable for single‑supply operation in standard voltage rails; designed for industrial/auto temperature ranges
- 8-pin package variants (e.g., SOIC/D‑type) for compact PCB mounting
Applications: industrial automation, RS-485 networks, long‑line or noisy environments.
- 2-wire, half‑duplex RS-485 transceiver (one driver, one receiver)
- 3-state outputs with separate enable inputs (DE for driver, RE for receiver)
- Fail-safe receiver: RO outputs a logic‑high when inputs are open, idle, or shorted
- Wide bus input/common-mode range on A/B lines; robust protection on I/O pins
- High-speed operation (data rates in tens of Mbps; typical around 40 Mbps)
- ESD and fault protection on the bus pins
- Suitable for single‑supply operation in standard voltage rails; designed for industrial/auto temperature ranges
- 8-pin package variants (e.g., SOIC/D‑type) for compact PCB mounting
Applications: industrial automation, RS-485 networks, long‑line or noisy environments.
Pinout
- Pin count: 8 pins (package like SOIC-8/MSOP-8, etc.)
- Function: High-speed, half-duplex RS-485/RS-422 transceiver. Pins include:
- DI: data input
- RO: receiver output
- DE: driver enable
- RE: receiver enable
- A, B: differential bus lines
- VCC: supply
- GND: ground
- Function: High-speed, half-duplex RS-485/RS-422 transceiver. Pins include:
- DI: data input
- RO: receiver output
- DE: driver enable
- RE: receiver enable
- A, B: differential bus lines
- VCC: supply
- GND: ground
Manufacturer
- Manufacturer: Texas Instruments Incorporated (TI).
- What kind of company: American multinational semiconductor company that designs and manufactures analog and embedded processing ICs for automotive, industrial, communications, and consumer electronics markets.
- What kind of company: American multinational semiconductor company that designs and manufactures analog and embedded processing ICs for automotive, industrial, communications, and consumer electronics markets.
Application
SN65HVD06D is a 2‑wire, half‑duplex RS‑485/RS‑422 transceiver with fail‑safe outputs. Typical application areas:
- Industrial automation and process control (PLC I/O, Modbus RTU, fieldbus networks)
- Building automation (HVAC, lighting, security, energy management)
- Energy/metering systems and smart‑grid sensors
- Remote data acquisition and SCADA/telemetry links
- Any multi‑point RS‑485/RS‑422 networks requiring robust drive and fail‑safe receivers (long‑distance, noisy environments)
- Industrial automation and process control (PLC I/O, Modbus RTU, fieldbus networks)
- Building automation (HVAC, lighting, security, energy management)
- Energy/metering systems and smart‑grid sensors
- Remote data acquisition and SCADA/telemetry links
- Any multi‑point RS‑485/RS‑422 networks requiring robust drive and fail‑safe receivers (long‑distance, noisy environments)
Package
8-pin SOIC (D) package.
