Hình ảnh chỉ để tham khảo
SN65HVD33RHLR
+BOMIC TRANSCEIVER FULL 1/1 20VQFN
-
Nhà sản xuấtTexas Dụng cụ
-
Ông. Phần #SN65HVD33RHLR
-
Có sẵn4281
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Part Status | Active |
| Type | Transceiver |
| Protocol | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Full |
| Receiver Hysteresis | 50 mV |
| Data Rate | 26Mbps |
| Voltage - Supply | 3V ~ 3.6V |
| Operating Temperature | -40°C ~ 85°C |
| Mounting Type | Surface Mount |
| Package / Case | 20-VFQFN Exposed Pad |
| Supplier Device Package | 20-VQFN (3.5x4.5) |
| Base Product Number | 65HVD33 |
Tổng quan
Description
The SN65HVD33RHLR is a high-speed CAN (Controller Area Network) transceiver designed for robust communication in automotive and industrial applications. It operates within a voltage range of 4.5V to 5.5V and supports data rates up to 1 Mbps. This device features a differential signaling architecture that enhances noise immunity and allows for reliable communication over long distances.
Key features include low power consumption, a wide temperature range (-40°C to +125°C), and integrated fault-tolerant capabilities. The transceiver supports both standard CAN and CAN FD protocols, making it versatile for various applications. Additionally, it includes built-in thermal shutdown and a fail-safe mechanism to ensure system reliability.
The SN65HVD33RHLR is commonly used in automotive networks, industrial automation, and robotics, where dependable data transmission is critical. Its compact package and robust performance make it an ideal choice for developers seeking to implement CAN communication in their designs.
Key features include low power consumption, a wide temperature range (-40°C to +125°C), and integrated fault-tolerant capabilities. The transceiver supports both standard CAN and CAN FD protocols, making it versatile for various applications. Additionally, it includes built-in thermal shutdown and a fail-safe mechanism to ensure system reliability.
The SN65HVD33RHLR is commonly used in automotive networks, industrial automation, and robotics, where dependable data transmission is critical. Its compact package and robust performance make it an ideal choice for developers seeking to implement CAN communication in their designs.
Equivalent
The SN65HVD33RHLR is a CAN transceiver. Equivalent products include:
1. MCP2551 (Microchip)
2. TJA1050 (NXP)
3. ISO1042 (Texas Instruments)
4. SN65HVD231 (Texas Instruments)
5. PCA82C250 (NXP)
Ensure to check specifications for compatibility with your application.
1. MCP2551 (Microchip)
2. TJA1050 (NXP)
3. ISO1042 (Texas Instruments)
4. SN65HVD231 (Texas Instruments)
5. PCA82C250 (NXP)
Ensure to check specifications for compatibility with your application.
Features
The SN65HVD33RHLR is a CAN transceiver designed for robust communication in automotive and industrial applications. Key features include:
1. High-Speed Data Rate: Supports data rates up to 1 Mbps, facilitating efficient data transmission.
2. Low Power Consumption: Operates with a low quiescent current, enhancing energy efficiency in battery-powered systems.
3. Wide Supply Voltage Range: Accepts a supply voltage from 3.0V to 5.5V, providing flexibility for various applications.
4. Fault Tolerance: Features thermal shutdown and short-circuit protection to ensure reliability in harsh environments.
5. Single-Wire Bus: Compatible with a single-wire CAN bus, simplifying wiring and reducing complexity.
6. Integrated Transceiver: Combines both transmit and receive functions, minimizing external component count.
7. Standard Compliance: Meets the ISO 11898-2 standard, making it suitable for automotive and industrial communication networks.
8. Dominant Time-Out: Prevents bus locking by timing out when the bus is held in a dominant state for too long.
These features make the SN65HVD33RHLR an ideal choice for reliable CAN communications.
1. High-Speed Data Rate: Supports data rates up to 1 Mbps, facilitating efficient data transmission.
2. Low Power Consumption: Operates with a low quiescent current, enhancing energy efficiency in battery-powered systems.
3. Wide Supply Voltage Range: Accepts a supply voltage from 3.0V to 5.5V, providing flexibility for various applications.
4. Fault Tolerance: Features thermal shutdown and short-circuit protection to ensure reliability in harsh environments.
5. Single-Wire Bus: Compatible with a single-wire CAN bus, simplifying wiring and reducing complexity.
6. Integrated Transceiver: Combines both transmit and receive functions, minimizing external component count.
7. Standard Compliance: Meets the ISO 11898-2 standard, making it suitable for automotive and industrial communication networks.
8. Dominant Time-Out: Prevents bus locking by timing out when the bus is held in a dominant state for too long.
These features make the SN65HVD33RHLR an ideal choice for reliable CAN communications.
Pinout
The SN65HVD33RHLR is a CAN transceiver with a total of 8 pins. Its primary function is to provide the physical layer interface for Controller Area Network (CAN) applications, facilitating communication between a microcontroller and the CAN bus.
Pin Count and Functions:
1. VIO (Pin 1): Voltage input for logic level.
2. TXD (Pin 2): Transmit data input from the microcontroller.
3. RXD (Pin 3): Receive data output to the microcontroller.
4. GND (Pin 4): Ground connection.
5. CANH (Pin 5): High-level CAN bus connection.
6. CANL (Pin 6): Low-level CAN bus connection.
7. STB (Pin 7): Standby mode control pin.
8. VCC (Pin 8): Supply voltage for the transceiver.
The SN65HVD33RHLR supports high-speed CAN communication and is suitable for automotive and industrial applications.
Pin Count and Functions:
1. VIO (Pin 1): Voltage input for logic level.
2. TXD (Pin 2): Transmit data input from the microcontroller.
3. RXD (Pin 3): Receive data output to the microcontroller.
4. GND (Pin 4): Ground connection.
5. CANH (Pin 5): High-level CAN bus connection.
6. CANL (Pin 6): Low-level CAN bus connection.
7. STB (Pin 7): Standby mode control pin.
8. VCC (Pin 8): Supply voltage for the transceiver.
The SN65HVD33RHLR supports high-speed CAN communication and is suitable for automotive and industrial applications.
Manufacturer
The SN65HVD33RHLR is manufactured by Texas Instruments (TI), a prominent semiconductor company based in the United States. Founded in 1930, Texas Instruments specializes in designing and manufacturing a wide range of semiconductor products and integrated circuits (ICs), including analog, digital signal processing, and embedded processing solutions. TI serves various industries such as automotive, industrial, communications, and consumer electronics. The SN65HVD33RHLR is a CAN transceiver, primarily used for Controller Area Network (CAN) communication in automotive and industrial applications. It is designed to facilitate robust data transmission in noisy environments, making it essential for reliable communication in various electronic systems. Texas Instruments is known for its innovation and quality in the semiconductor space, contributing significantly to advancements in technology across multiple sectors.
Application
The SN65HVD33RHLR is a CAN transceiver designed for Controller Area Network (CAN) applications. Its primary application areas include automotive communication systems, industrial automation, and building automation. It supports robust, fault-tolerant communication in noisy environments, making it suitable for applications in robotics, medical devices, and transportation systems. Additionally, it is used in smart grid technology and IoT devices where reliable data transfer is essential. The transceiver is compatible with both standard and low-speed CAN protocols, enhancing its versatility across various industries.
Package
The SN65HVD33RHLR is packaged in a QFN (Quad Flat No-lead) package, specifically in a 16-pin configuration. This type of package is designed for compactness and efficient thermal performance.
