Hình ảnh chỉ để tham khảo
SN75ALS176BDR
+BOMIC TRANSCEIVER HALF 1/1 8SOIC
-
Nhà sản xuấtTexas Dụng cụ
-
Ông. Phần #SN75ALS176BDR
-
Có sẵn2850
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Part Status | Active |
| Type | Transceiver |
| Protocol | RS422, RS485 |
| Number of Drivers/Receivers | 1/1 |
| Duplex | Half |
| Receiver Hysteresis | 60 mV |
| Voltage - Supply | 4.75V ~ 5.25V |
| Operating Temperature | 0°C ~ 70°C |
| Mounting Type | Surface Mount |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Supplier Device Package | 8-SOIC |
| Base Product Number | 75ALS176 |
Tổng quan
Description
The SN75ALS176BDR is a quad differential line transceiver designed for high-speed data communication in various applications, including data buses and communication networks. It operates with a wide voltage supply range of 4.5V to 5.5V and supports data rates up to 25 Mbps, making it suitable for fast and reliable signal transmission.
This device features four differential pairs, allowing for simultaneous data transmission and reception, which enhances communication efficiency. It includes a fail-safe feature that ensures a known output state in the absence of a valid input signal. The SN75ALS176BDR is designed to interface with TTL and CMOS logic levels, making it compatible with a variety of microcontrollers and processors.
Packaged in a small SOIC format, it is ideal for space-constrained applications. The device is also characterized by low power consumption and high noise immunity, contributing to robust performance in noisy environments. Overall, the SN75ALS176BDR is a versatile solution for differential signaling in modern electronic systems.
This device features four differential pairs, allowing for simultaneous data transmission and reception, which enhances communication efficiency. It includes a fail-safe feature that ensures a known output state in the absence of a valid input signal. The SN75ALS176BDR is designed to interface with TTL and CMOS logic levels, making it compatible with a variety of microcontrollers and processors.
Packaged in a small SOIC format, it is ideal for space-constrained applications. The device is also characterized by low power consumption and high noise immunity, contributing to robust performance in noisy environments. Overall, the SN75ALS176BDR is a versatile solution for differential signaling in modern electronic systems.
Equivalent
The SN75ALS176BDR is a differential line driver/receiver. Equivalent products include:
1. SN65HVD72
2. SN65HVD79
3. MAX3485
4. LT1785
5. ADM2483
Always check the specific datasheets for compatibility in terms of voltage levels, speed, and features for your application.
1. SN65HVD72
2. SN65HVD79
3. MAX3485
4. LT1785
5. ADM2483
Always check the specific datasheets for compatibility in terms of voltage levels, speed, and features for your application.
Features
The SN75ALS176BDR is a quad differential line driver designed for high-speed data transmission. Key features include:
1. Quad Driver: Contains four differential line drivers.
2. Differential Signaling: Supports RS-485 and RS-422 communication protocols, enhancing noise immunity.
3. High-Speed Performance: Capable of operating at data rates up to 10 Mbps.
4. Wide Voltage Range: Operates with a supply voltage of 4.75V to 5.25V.
5. Low Power Consumption: Designed for low power operation, making it suitable for battery-powered applications.
6. Thermal Shutdown Protection: Includes built-in thermal protection to prevent overheating.
7. Short-Circuit Protection: Offers robust protection against short-circuit conditions.
8. Small Package: Available in a compact SOIC-16 package, facilitating space-saving designs.
9. High Output Drive: Capable of driving up to 60mA on its output pins.
These features make the SN75ALS176BDR ideal for various data communication applications in industrial and commercial environments.
1. Quad Driver: Contains four differential line drivers.
2. Differential Signaling: Supports RS-485 and RS-422 communication protocols, enhancing noise immunity.
3. High-Speed Performance: Capable of operating at data rates up to 10 Mbps.
4. Wide Voltage Range: Operates with a supply voltage of 4.75V to 5.25V.
5. Low Power Consumption: Designed for low power operation, making it suitable for battery-powered applications.
6. Thermal Shutdown Protection: Includes built-in thermal protection to prevent overheating.
7. Short-Circuit Protection: Offers robust protection against short-circuit conditions.
8. Small Package: Available in a compact SOIC-16 package, facilitating space-saving designs.
9. High Output Drive: Capable of driving up to 60mA on its output pins.
These features make the SN75ALS176BDR ideal for various data communication applications in industrial and commercial environments.
Pinout
The SN75ALS176BDR is a 16-pin dual differential line driver/receiver designed for RS-485 and RS-422 communication. The pin count is 16, and its function includes:
1. Pins 1-2: A1, A2 - Differential line drivers for transmitting data.
2. Pins 3-4: B1, B2 - Complementary outputs for drivers.
3. Pins 5-6: Y1, Y2 - Differential input for receiver functionality.
4. Pins 7-8: Z1, Z2 - Complementary outputs for receivers.
5. Pins 9-10: GND - Ground connection.
6. Pin 11: VCC - Supply voltage.
7. Pin 12: DE - Driver enable.
8. Pin 13: RE - Receiver enable (active low).
9. Pins 14-16: NC - No connection.
This device supports high-speed data transmission and is suitable for multi-point communication systems.
1. Pins 1-2: A1, A2 - Differential line drivers for transmitting data.
2. Pins 3-4: B1, B2 - Complementary outputs for drivers.
3. Pins 5-6: Y1, Y2 - Differential input for receiver functionality.
4. Pins 7-8: Z1, Z2 - Complementary outputs for receivers.
5. Pins 9-10: GND - Ground connection.
6. Pin 11: VCC - Supply voltage.
7. Pin 12: DE - Driver enable.
8. Pin 13: RE - Receiver enable (active low).
9. Pins 14-16: NC - No connection.
This device supports high-speed data transmission and is suitable for multi-point communication systems.
Manufacturer
The SN75ALS176BDR is manufactured by Texas Instruments (TI), a prominent technology company based in the United States. Texas Instruments specializes in the design and production of semiconductors and various integrated circuits, with a strong focus on analog and digital signal processing. Established in 1930, TI is one of the largest semiconductor manufacturers in the world, serving a wide range of industries, including automotive, industrial, and consumer electronics. The company is well-known for its innovation in analog technology, microcontrollers, and digital signal processors, and it plays a significant role in the development of advanced electronic solutions. TI's commitment to quality and reliability has made it a trusted partner for engineers and designers, enabling them to create cutting-edge applications.
Application
The SN75ALS176BDR is a quad differential line driver designed for use in various applications, including:
1. RS-485 Communication: Facilitating long-distance, robust data transmission in industrial environments.
2. Data Acquisition Systems: Connecting sensors and devices to data processing units.
3. Fieldbus Networks: Supporting industrial automation protocols like Modbus and Profibus.
4. Telecommunications: Enabling reliable communication links in telecom equipment.
5. Embedded Systems: Serving as a communication interface in microcontroller-based projects.
Its features make it suitable for data transfer in noisy environments, enhancing signal integrity and performance.
1. RS-485 Communication: Facilitating long-distance, robust data transmission in industrial environments.
2. Data Acquisition Systems: Connecting sensors and devices to data processing units.
3. Fieldbus Networks: Supporting industrial automation protocols like Modbus and Profibus.
4. Telecommunications: Enabling reliable communication links in telecom equipment.
5. Embedded Systems: Serving as a communication interface in microcontroller-based projects.
Its features make it suitable for data transfer in noisy environments, enhancing signal integrity and performance.
Package
The SN75ALS176BDR is packaged in a SOIC (Small Outline Integrated Circuit) package type, specifically the 16-pin SOIC (Surface Mount) configuration.
