Hình ảnh chỉ để tham khảo
STM32C011J4M6
+BOMIC MCU 32BIT 16KB FLASH 8SO
-
Nhà sản xuấtSTMicroelectronics
-
Ông. Phần #STM32C011J4M6
-
Có sẵn10462
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Series | STM32C0 |
| Part Status | Active |
| Base Product Number | STM32C011 |
| Digi Key Programmable | Not Verified |
| Core Processor | ARM® Cortex®-M0+ |
| Core Size | 32-Bit |
| Speed | 48MHz |
| Connectivity | I2C, IrDA, LINbus, SPI, UART/USART |
| Peripherals | Brown-out Detect/Reset, POR, PWM, Temp Sensor, WDT |
| Number of I/O | 6 |
| Program Memory Size | 16KB (16K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 6K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V ~ 3.6V |
| Data Converters | A/D 7x12b SAR |
| Oscillator Type | External, Internal |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
| Supplier Device Package | 8-SO |
| Package / Case | 8-SOIC (0.154", 3.90mm Width) |
| Packaging | Tray |
Tổng quan
Description
STM32C011J4M6 is an entry‑level 32‑bit MCU from ST’s STM32C0 family. It uses an ARM Cortex‑M0+ core and is aimed at low‑cost, low‑power embedded apps. It typically runs up to about 48 MHz and combines a small flash/RAM with a modest peripheral set.
Key points
- Memory/package: small flash and RAM (exact sizes depend on the variant; common configurations are in the low tens of KB total). Check the datasheet for the exact numbers on J4M6.
- Peripherals: GPIO, a 12‑bit ADC, several timers, and serial interfaces (USART/UART, I2C, SPI). USB is not guaranteed on all STM32C0 parts.
- Power: multiple low‑power modes (run, sleep, stop) for battery‑powered designs.
- Development: supported by STM32CubeIDE and HAL/LL drivers; good ecosystem of example projects and middleware.
- Use cases: simple controllers, sensor hubs, IoT endpoints, compact devices requiring low cost and small footprint.
Note: for exact specs (flash/RAM, peripherals), consult the official datasheet and product page.
Key points
- Memory/package: small flash and RAM (exact sizes depend on the variant; common configurations are in the low tens of KB total). Check the datasheet for the exact numbers on J4M6.
- Peripherals: GPIO, a 12‑bit ADC, several timers, and serial interfaces (USART/UART, I2C, SPI). USB is not guaranteed on all STM32C0 parts.
- Power: multiple low‑power modes (run, sleep, stop) for battery‑powered designs.
- Development: supported by STM32CubeIDE and HAL/LL drivers; good ecosystem of example projects and middleware.
- Use cases: simple controllers, sensor hubs, IoT endpoints, compact devices requiring low cost and small footprint.
Note: for exact specs (flash/RAM, peripherals), consult the official datasheet and product page.
Features
Here are key features of STM32C011J4M6 (C0 family) in brief:
- Core: 32-bit ARM Cortex-M0+ MCU
- Speed: Up to 48 MHz
- Memory: Flash and SRAM sizes vary by package (typical options in this family range tens of KB to a few hundred KB of Flash and a few to tens of KB RAM)
- Low-power: Multiple power modes with low sleep/standby current
- Peripherals: 12-bit ADC (with multiple channels), comparators, general-purpose timers, RTC, watchdog, CRC
- Communication: USART/UART, I2C, SPI (I2S not guaranteed on all variations)
- DMA: Direct Memory Access controller
- Debug/Programming: SWD/JTAG support
- Security/robustness: Brown-out/power-voltage detection
- Package: J4M6 variant (compact, cost-optimized)
- Operating voltage: 1.65–3.6 V (typical)
- Temperature: Industrial variants available
Note: Exact memory sizes, peripherals, and features depend on the specific package/temperature grade. Check the official datasheet for the precise configuration of STM32C011J4M6.
- Core: 32-bit ARM Cortex-M0+ MCU
- Speed: Up to 48 MHz
- Memory: Flash and SRAM sizes vary by package (typical options in this family range tens of KB to a few hundred KB of Flash and a few to tens of KB RAM)
- Low-power: Multiple power modes with low sleep/standby current
- Peripherals: 12-bit ADC (with multiple channels), comparators, general-purpose timers, RTC, watchdog, CRC
- Communication: USART/UART, I2C, SPI (I2S not guaranteed on all variations)
- DMA: Direct Memory Access controller
- Debug/Programming: SWD/JTAG support
- Security/robustness: Brown-out/power-voltage detection
- Package: J4M6 variant (compact, cost-optimized)
- Operating voltage: 1.65–3.6 V (typical)
- Temperature: Industrial variants available
Note: Exact memory sizes, peripherals, and features depend on the specific package/temperature grade. Check the official datasheet for the precise configuration of STM32C011J4M6.
Pinout
Pin count: 20 pins.
Function: 32-bit ARM Cortex-M0+ microcontroller in the STM32C0 family (low-pin, low-power MCU) with integrated peripherals (GPIO, timers, and communication interfaces such as USART, I2C, SPI, plus ADC).
Function: 32-bit ARM Cortex-M0+ microcontroller in the STM32C0 family (low-pin, low-power MCU) with integrated peripherals (GPIO, timers, and communication interfaces such as USART, I2C, SPI, plus ADC).
Manufacturer
- Manufacturer: STMicroelectronics (ST)
- What kind of company: A global semiconductor company (multinational corporation) that designs, manufactures, and sells integrated circuits and semiconductor products, including the STM32 microcontroller family. Headquarters: Geneva, Switzerland.
- What kind of company: A global semiconductor company (multinational corporation) that designs, manufactures, and sells integrated circuits and semiconductor products, including the STM32 microcontroller family. Headquarters: Geneva, Switzerland.
Application
STM32C011J4M6 is a low-cost, low-power 32-bit MCU (Cortex‑M0+). Typical application areas:
- Battery-powered sensors, data loggers, and environmental monitoring
- Home automation and IoT edge devices
- Small consumer electronics (wearables, remotes, display/controllers)
- Simple motor/actuator control for hobby robotics
- USB-connected peripherals and basic embedded interfaces
- General-purpose, cost-sensitive embedded control and prototyping/education
It combines essential peripherals (timers, ADC/DAC, USART/I2C/SPI) in a compact footprint for modest performance and power budgets.
- Battery-powered sensors, data loggers, and environmental monitoring
- Home automation and IoT edge devices
- Small consumer electronics (wearables, remotes, display/controllers)
- Simple motor/actuator control for hobby robotics
- USB-connected peripherals and basic embedded interfaces
- General-purpose, cost-sensitive embedded control and prototyping/education
It combines essential peripherals (timers, ADC/DAC, USART/I2C/SPI) in a compact footprint for modest performance and power budgets.
Package
UFQFPN20 (4×4 mm) 20-pin leadless package.
