Thông số kỹ thuật
| thuộc tính | Giá trị |
| Package / Case | Tape & Reel (TR) |
| Series | STM32F1 |
| Part Status | Active |
| Core Processor | ARM® Cortex®-M3 |
| Core Size | 32-Bit Single-Core |
| Speed | 72MHz |
| Connectivity | CANbus, I²C, IrDA, LINbus, SPI, UART/USART, USB |
| Peripherals | DMA, Motor Control PWM, PDR, POR, PVD, PWM, Temp Sensor, WDT |
| Number of I/O | 80 |
| Program Memory Size | 512KB (512K x 8) |
| Program Memory Type | FLASH |
| RAM Size | 64K x 8 |
| Voltage - Supply (Vcc/Vdd) | 2V ~ 3.6V |
| Data Converters | A/D 16x12b; D/A 2x12b |
| Oscillator Type | Internal |
| Operating Temperature | -40°C ~ 85°C (TA) |
| Mounting Type | Surface Mount |
Tổng quan
Description
STM32F103VEH6TR is a 32‑bit ARM Cortex‑M3 microcontroller from ST’s STM32F1 family. It runs a Cortex‑M3 core up to 72 MHz and integrates a broad set of peripherals for embedded control: GPIOs, timers (TIMx), ADCs (12‑bit), USART/UART, SPI, I2C, CAN, USB Full‑Speed on applicable variants, RTC, watchdogs, and DMA channels. It operates from 2.0 to 3.6 V and is provided in a 100‑pin LQFP package with tape‑and‑reel packaging (TR). Memory size (Flash/RAM) and exact peripherals depend on the specific silicon revision within the VE family, so consult the datasheet for precise figures. Typical uses include motor control, USB devices, data acquisition, and general embedded control. Development is supported by STM32CubeMX for configuration and the HAL or Standard Peripheral Library, with toolchains such as Keil MDK, IAR, or GCC.
Equivalent
Equivalent ST parts to STM32F103VEH6TR are:
- STM32F103VET6
- STM32F103ZET6
These are the closest ST equivalents (same Cortex-M3, 100-pin LQFP, 72 MHz, similar flash/RAM). The TR suffix is only packaging (tape-and-reel). For exact cross-references and packaging, use ST’s product cross-reference tool.
- STM32F103VET6
- STM32F103ZET6
These are the closest ST equivalents (same Cortex-M3, 100-pin LQFP, 72 MHz, similar flash/RAM). The TR suffix is only packaging (tape-and-reel). For exact cross-references and packaging, use ST’s product cross-reference tool.
Features
Key features of STM32F103VEH6TR:
- 32-bit ARM Cortex-M3 core, up to 72 MHz operation
- Memory: up to 512 KB Flash, up to 64 KB RAM
- USB 2.0 Full-Speed device interface
- CAN 2.0B controller
- Rich I/O and buses: multiple USART/UARTs, SPI, I2C
- Timers: advanced TIM1, general-purpose TIM2–TIM4, basic TIM6/TIM7
- 12-bit ADC (with multiple channels) and DMA support
- CRC calculation unit
- Debug/trace: SWD/JTAG
- Power: 2.0–3.6 V operating range
- Industrial temperature range (typical for TR parts): -40 to 85 °C
- Package/packaging: Tape & Reel variant available (H6/VE line devices typical)
Note: exact memory and peripheral counts can vary slightly by package revision within the F103VE family.
- 32-bit ARM Cortex-M3 core, up to 72 MHz operation
- Memory: up to 512 KB Flash, up to 64 KB RAM
- USB 2.0 Full-Speed device interface
- CAN 2.0B controller
- Rich I/O and buses: multiple USART/UARTs, SPI, I2C
- Timers: advanced TIM1, general-purpose TIM2–TIM4, basic TIM6/TIM7
- 12-bit ADC (with multiple channels) and DMA support
- CRC calculation unit
- Debug/trace: SWD/JTAG
- Power: 2.0–3.6 V operating range
- Industrial temperature range (typical for TR parts): -40 to 85 °C
- Package/packaging: Tape & Reel variant available (H6/VE line devices typical)
Note: exact memory and peripheral counts can vary slightly by package revision within the F103VE family.
Pinout
- Pin count: 100 pins (LQFP-100, package used in STM32F103VEH6TR)
- Function: 32-bit ARM Cortex-M3 microcontroller (STM32F1 family) with integrated Flash/RAM and peripherals (GPIO, timers, ADC, and communications such as USART/SPI/I2C; USB/CAN variants available).
- Function: 32-bit ARM Cortex-M3 microcontroller (STM32F1 family) with integrated Flash/RAM and peripherals (GPIO, timers, ADC, and communications such as USART/SPI/I2C; USB/CAN variants available).
Manufacturer
- Manufacturer: STMicroelectronics (STMicroelectronics N.V.)
- What kind of company: A multinational semiconductor and electronics manufacturer that designs and produces microcontrollers (including STM32), sensors, analog and power-management ICs for automotive, industrial, and consumer markets.
- What kind of company: A multinational semiconductor and electronics manufacturer that designs and produces microcontrollers (including STM32), sensors, analog and power-management ICs for automotive, industrial, and consumer markets.
Application
Applications areas for STM32F103VEH6TR include:
- Motor control: BLDC/PMSM drives, servo control
- Industrial automation and embedded control systems
- USB-enabled peripherals and interfaces (FS/OTG)
- Data acquisition, sensing, and instrumentation
- Consumer electronics and smart appliances
- IoT edge devices and small gateways
- Automotive instrumentation and body electronics
- Building automation, smart lighting and energy management
Note: F103 offers ADC, timers/PWM, communication peripherals (USART, SPI, I2C, CAN on some variants) suitable for these roles.
- Motor control: BLDC/PMSM drives, servo control
- Industrial automation and embedded control systems
- USB-enabled peripherals and interfaces (FS/OTG)
- Data acquisition, sensing, and instrumentation
- Consumer electronics and smart appliances
- IoT edge devices and small gateways
- Automotive instrumentation and body electronics
- Building automation, smart lighting and energy management
Note: F103 offers ADC, timers/PWM, communication peripherals (USART, SPI, I2C, CAN on some variants) suitable for these roles.
Package
Plastic LQFP package, 100-pin (LQFP-100) with 0.5 mm pitch (TR = Tape & Reel variant).
