Hình ảnh chỉ để tham khảo
SY6280AAC
+BOM-
Nhà sản xuấtSilergy Corp
-
Ông. Phần #SY6280AAC
-
Bảng dữ liệu SY6280AAC DataSheet
-
Có sẵn20742
365 Đảm bảo chất lượng ngày
7*24 giờ dịch vụ quarantee
90-Bảo hành sau bán hàng ngày
Bảo hành sản phẩm chính xác
Thông số kỹ thuật
| thuộc tính | Giá trị |
| Manufacturer | Silergy Corp |
| Package / Case | SOT-23-5 |
| Voltage - Supply | 2.4V~5.5V |
| Type | High-side switch |
| Operating Temperature - | -40℃~+125℃ |
| Number of Channels | 1 |
| Control Input Logic | Active High |
| Rds(on) | 80mΩ |
Tổng quan
Description
The SY6280AAC is a highly efficient, low-dropout (LDO) linear voltage regulator designed for portable and battery-powered applications. It features an ultra-low quiescent current (typically 1.5μA) and a low dropout voltage (as low as 160mV at 300mA), making it ideal for extending battery life in devices like IoT sensors, wearables, and wireless modules.
Key specifications:
- Input Voltage Range: 2.0V–5.5V
- Output Voltage: Adjustable (0.8V–5.0V) or fixed options
- Output Current: Up to 300mA
- High PSRR (60dB @1kHz) for stable performance
- Enable (EN) pin for power-saving mode
The SY6280AAC includes built-in protections like overcurrent, short-circuit, and thermal shutdown. Its small SOT-23-5 package suits space-constrained designs.
Applications:
- Battery-powered devices
- Portable electronics
- Energy-efficient embedded systems
This regulator balances performance, efficiency, and compactness, making it a reliable choice for low-power designs.
Key specifications:
- Input Voltage Range: 2.0V–5.5V
- Output Voltage: Adjustable (0.8V–5.0V) or fixed options
- Output Current: Up to 300mA
- High PSRR (60dB @1kHz) for stable performance
- Enable (EN) pin for power-saving mode
The SY6280AAC includes built-in protections like overcurrent, short-circuit, and thermal shutdown. Its small SOT-23-5 package suits space-constrained designs.
Applications:
- Battery-powered devices
- Portable electronics
- Energy-efficient embedded systems
This regulator balances performance, efficiency, and compactness, making it a reliable choice for low-power designs.
Equivalent
The SY6280AAC is a load switch with integrated MOSFET. Equivalent alternatives include:
- TPS22965 (TI)
- AP22802 (Diodes Inc.)
- FPF1320 (ON Semiconductor)
- MIC94090 (Microchip)
These offer similar features like low RDS(ON), adjustable rise time, and small packages. Check datasheets for exact specs.
- TPS22965 (TI)
- AP22802 (Diodes Inc.)
- FPF1320 (ON Semiconductor)
- MIC94090 (Microchip)
These offer similar features like low RDS(ON), adjustable rise time, and small packages. Check datasheets for exact specs.
Features
The SY6280AAC is a high-efficiency, low-power synchronous step-down DC-DC converter with the following key features:
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage: Adjustable (0.6V to VIN)
- Output Current: Up to 3A
- High Efficiency: Up to 96% (PWM mode)
- Low Quiescent Current: 22μA (typical)
- Switching Frequency: 1.5MHz (fixed)
- Light Load Efficiency: Supports PFM mode for better efficiency at light loads
- Protections: Over-current (OCP), thermal shutdown (TSD), and under-voltage lockout (UVLO)
- Package: SOT23-6 (compact footprint)
Ideal for portable devices, IoT, and battery-powered applications due to its small size, efficiency, and robust performance.
- Input Voltage Range: 2.5V to 5.5V
- Output Voltage: Adjustable (0.6V to VIN)
- Output Current: Up to 3A
- High Efficiency: Up to 96% (PWM mode)
- Low Quiescent Current: 22μA (typical)
- Switching Frequency: 1.5MHz (fixed)
- Light Load Efficiency: Supports PFM mode for better efficiency at light loads
- Protections: Over-current (OCP), thermal shutdown (TSD), and under-voltage lockout (UVLO)
- Package: SOT23-6 (compact footprint)
Ideal for portable devices, IoT, and battery-powered applications due to its small size, efficiency, and robust performance.
Pinout
The SY6280AAC is a 6-pin load switch IC with the following functions:
1. Input (IN) – Connects to the power source (2.5V–5.5V).
2. Enable (EN) – Controls ON/OFF state (active high).
3. Ground (GND) – Reference ground.
4. Output (OUT) – Delivers power to the load.
5. Power Good (PG) – Open-drain output indicating output status.
6. No Connect (NC) – Unused pin.
It features low quiescent current, reverse current blocking, and overcurrent protection, making it suitable for portable devices.
1. Input (IN) – Connects to the power source (2.5V–5.5V).
2. Enable (EN) – Controls ON/OFF state (active high).
3. Ground (GND) – Reference ground.
4. Output (OUT) – Delivers power to the load.
5. Power Good (PG) – Open-drain output indicating output status.
6. No Connect (NC) – Unused pin.
It features low quiescent current, reverse current blocking, and overcurrent protection, making it suitable for portable devices.
Manufacturer
The SY6280AAC is a power management IC manufactured by Silergy Corp, a leading Chinese semiconductor company specializing in high-performance analog and mixed-signal ICs.
Silergy, founded in 2008 and headquartered in Hangzhou, focuses on power management solutions for consumer electronics, industrial, and automotive applications. The company is known for its efficient, compact, and cost-effective power ICs, competing with global players like Texas Instruments and Maxim Integrated.
The SY6280AAC is a load switch with features like low on-resistance and overcurrent protection, commonly used in portable devices. Silergy's products are widely adopted in smartphones, tablets, and IoT devices.
In summary:
- Manufacturer: Silergy Corp
- Company Type: Semiconductor (Analog/Mixed-Signal ICs)
- Key Focus: Power management solutions
- Applications: Consumer electronics, industrial, automotive
Silergy, founded in 2008 and headquartered in Hangzhou, focuses on power management solutions for consumer electronics, industrial, and automotive applications. The company is known for its efficient, compact, and cost-effective power ICs, competing with global players like Texas Instruments and Maxim Integrated.
The SY6280AAC is a load switch with features like low on-resistance and overcurrent protection, commonly used in portable devices. Silergy's products are widely adopted in smartphones, tablets, and IoT devices.
In summary:
- Manufacturer: Silergy Corp
- Company Type: Semiconductor (Analog/Mixed-Signal ICs)
- Key Focus: Power management solutions
- Applications: Consumer electronics, industrial, automotive
Application
The SY6280AAC is a load switch IC primarily used for power management in portable and battery-powered devices. Key application areas include:
1. Smartphones/Tablets – Controls power rails for peripherals.
2. Wearables – Efficient power switching in compact designs.
3. IoT Devices – Manages low-power modes and wake-up functions.
4. Consumer Electronics – Enables safe power distribution in cameras, drones, etc.
5. Industrial Equipment – Provides reliable power control in embedded systems.
It features low quiescent current, overcurrent protection, and fast switching, making it ideal for energy-efficient applications.
1. Smartphones/Tablets – Controls power rails for peripherals.
2. Wearables – Efficient power switching in compact designs.
3. IoT Devices – Manages low-power modes and wake-up functions.
4. Consumer Electronics – Enables safe power distribution in cameras, drones, etc.
5. Industrial Equipment – Provides reliable power control in embedded systems.
It features low quiescent current, overcurrent protection, and fast switching, making it ideal for energy-efficient applications.
Package
The SY6280AAC is a synchronous rectification step-down DC-DC converter in a SOT-23-6 package. It features high efficiency, low quiescent current, and a wide input voltage range (2.5V–5.5V), making it suitable for portable and battery-powered applications. The compact SOT-23-6 package is ideal for space-constrained designs.
