Thông số kỹ thuật
| thuộc tính | Giá trị |
| Package / Case | Bulk |
| Part Status | Obsolete |
| Transistor Type | NPN - Darlington |
| Voltage - Collector Emitter Breakdown(Max) | 60 V |
| Vce Saturation(Max) @ Ib Ic | 4V @ 20mA, 5A |
| Current - Collector Cutoff(Max) | 500µA |
| DC Current Gain(h FE)(Min) @ Ic Vce | 1000 @ 3A, 3V |
| Frequency - Transition | 4MHz |
| Operating Temperature | -65°C ~ 150°C (TJ) |
| Mounting Type | Through Hole |
Tổng quan
Description
The TIP120 is an NPN Darlington transistor designed for medium-power switching and amplification. It can handle up to 60V and 5A continuous current, making it suitable for driving motors, relays, and solenoids.
Key features:
- High current gain (hFE ≥ 1000), allowing control with low-power signals (e.g., from microcontrollers).
- Built-in flyback diode (for inductive load protection).
- TO-220 package for easy heat sinking.
How to use:
1. Connect the base to a control signal (with a 1kΩ resistor for Arduino/ESP).
2. Connect the collector to the load (e.g., motor).
3. Connect the emitter to ground.
Limitations:
- Not for high-frequency switching (slow turn-off due to Darlington pair).
- Requires a heat sink for high currents.
Ideal for hobbyist projects needing robust, simple switching.
Key features:
- High current gain (hFE ≥ 1000), allowing control with low-power signals (e.g., from microcontrollers).
- Built-in flyback diode (for inductive load protection).
- TO-220 package for easy heat sinking.
How to use:
1. Connect the base to a control signal (with a 1kΩ resistor for Arduino/ESP).
2. Connect the collector to the load (e.g., motor).
3. Connect the emitter to ground.
Limitations:
- Not for high-frequency switching (slow turn-off due to Darlington pair).
- Requires a heat sink for high currents.
Ideal for hobbyist projects needing robust, simple switching.
Equivalent
Equivalent products to the TIP120 (NPN Darlington transistor) include:
- TIP121 (higher voltage rating)
- TIP122 (higher current/voltage)
- BD679 (similar specs)
- MJE3055T (lower gain but higher current)
- TIP110 (lower voltage variant)
- 2N6045 (comparable Darlington)
These alternatives offer similar Darlington pair configurations for switching/amplification, with slight variations in voltage, current, or gain. Always check datasheets for exact compatibility.
- TIP121 (higher voltage rating)
- TIP122 (higher current/voltage)
- BD679 (similar specs)
- MJE3055T (lower gain but higher current)
- TIP110 (lower voltage variant)
- 2N6045 (comparable Darlington)
These alternatives offer similar Darlington pair configurations for switching/amplification, with slight variations in voltage, current, or gain. Always check datasheets for exact compatibility.
Application
The TIP120 is a popular NPN Darlington transistor used in various applications:
1. Motor Control – Drives DC motors in robotics and automation.
2. Relay/Solenoid Switching – Controls high-current inductive loads.
3. LED Drivers – Powers high-brightness LED arrays.
4. Power Supplies – Acts as a switch in voltage regulators.
5. Audio Amplifiers – Used in simple audio output stages.
6. Arduino/RPi Projects – Interfaces low-power microcontrollers with high-power devices.
Its high current gain (Darlington pair) and ability to handle up to 5A/60V make it ideal for medium-power switching tasks.
1. Motor Control – Drives DC motors in robotics and automation.
2. Relay/Solenoid Switching – Controls high-current inductive loads.
3. LED Drivers – Powers high-brightness LED arrays.
4. Power Supplies – Acts as a switch in voltage regulators.
5. Audio Amplifiers – Used in simple audio output stages.
6. Arduino/RPi Projects – Interfaces low-power microcontrollers with high-power devices.
Its high current gain (Darlington pair) and ability to handle up to 5A/60V make it ideal for medium-power switching tasks.
Package
The TIP120 is a Darlington NPN transistor available in a TO-220 package. This package type is widely used for power transistors, featuring a metal tab for heat dissipation. The TO-220 is robust, easy to mount, and suitable for medium-power applications. It has three leads (Base, Collector, Emitter) and can handle up to 60V and 5A.
