Thông số kỹ thuật
| thuộc tính | Giá trị |
| Package | Tube |
| Series | SpiFlash® |
| ProductStatus | Obsolete |
| MemoryType | Non-Volatile |
| MemoryFormat | FLASH |
| Technology | FLASH |
| MemorySize | 4Mb (512K x 8) |
| MemoryInterface | SPI |
| ClockFrequency | 104 MHz |
| WriteCycleTime-WordPage | 3ms |
| Voltage-Supply | 2.7V ~ 3.6V |
| OperatingTemperature | -40°C ~ 85°C (TA) |
| MountingType | Surface Mount |
| Package/Case | 8-SOIC (0.209, 5.30mm Width) |
Tổng quan
Description
W25X40BVSSIG is a Winbond 4-Mbit serial SPI flash memory. It provides persistent code/data storage for microcontrollers and embedded systems via an 8-pin package (SSIG code).
Key points:
- Capacity: 4 Mbit (512 KB)
- Interface: SPI (single I/O), supports standard and fast read commands
- Voltage: 2.7–3.6 V operation
- Speed: up to tens of MHz (typical fast-read rates; check datasheet for exact clock limits)
- Memory organization: 256-byte pages; 4 KB sectors; 64 KB blocks
- Operations: read, page program, sector/block erase, with WEL/WIP status bits; supports deep power-down
- Packaging: 8-pin RoHS-compliant package (SSIG)
Typical uses: firmware/boot code storage, data logging, firmware updates. For exact timing, command set, and packaging details, consult the Winbond W25X40BV datasheet.
Key points:
- Capacity: 4 Mbit (512 KB)
- Interface: SPI (single I/O), supports standard and fast read commands
- Voltage: 2.7–3.6 V operation
- Speed: up to tens of MHz (typical fast-read rates; check datasheet for exact clock limits)
- Memory organization: 256-byte pages; 4 KB sectors; 64 KB blocks
- Operations: read, page program, sector/block erase, with WEL/WIP status bits; supports deep power-down
- Packaging: 8-pin RoHS-compliant package (SSIG)
Typical uses: firmware/boot code storage, data logging, firmware updates. For exact timing, command set, and packaging details, consult the Winbond W25X40BV datasheet.
Equivalent
Equivalent 4‑Mbit SPI flash parts (SO-8, 2.7–3.6V, similar instruction set) include:
- GD25Q40B (GigaDevice)
- MX25L4006E / MX25L4006 (Macronix)
- N25Q040A (Micron)
- S25FL040 (Spansion)
- IS25LP040D (ISSI)
- P25Q40U (Puya)
Note: verify timing, voltage, and packaging for exact cross‑reference.
- GD25Q40B (GigaDevice)
- MX25L4006E / MX25L4006 (Macronix)
- N25Q040A (Micron)
- S25FL040 (Spansion)
- IS25LP040D (ISSI)
- P25Q40U (Puya)
Note: verify timing, voltage, and packaging for exact cross‑reference.
Features
Here are the key features of Winbond W25X40BVSSIG (4 Mbit SPI Serial Flash, 8-SOP):
- Capacity: 4 Mbit (512 KB) serial flash memory.
- Interface: SPI serial interface, single-I/O, 2.7–3.6 V supply (typical 3.3 V).
- Speed: Read up to high-speed clock (fast read command supported).
- Organization: 256-byte page size; memory organized in 8 × 64 KB blocks.
- Erase options: Sector erase (4 KB), Block erases (64 KB or 32 KB depending on variant), and Chip Erase.
- Program: Page program up to 256 bytes per operation.
- Power: Deep power-down mode and low active current options.
- Status/control: Status register with WIP/ WEL bits; Write protection features.
- Timing/compatibility: Standard SPI timing compatibility.
- Packaging: 8-pin SSOP/SOIC package (SSIG variant).
- Operating range: -40°C to 85°C (industrial).
- Capacity: 4 Mbit (512 KB) serial flash memory.
- Interface: SPI serial interface, single-I/O, 2.7–3.6 V supply (typical 3.3 V).
- Speed: Read up to high-speed clock (fast read command supported).
- Organization: 256-byte page size; memory organized in 8 × 64 KB blocks.
- Erase options: Sector erase (4 KB), Block erases (64 KB or 32 KB depending on variant), and Chip Erase.
- Program: Page program up to 256 bytes per operation.
- Power: Deep power-down mode and low active current options.
- Status/control: Status register with WIP/ WEL bits; Write protection features.
- Timing/compatibility: Standard SPI timing compatibility.
- Packaging: 8-pin SSOP/SOIC package (SSIG variant).
- Operating range: -40°C to 85°C (industrial).
Pinout
- Pin count: 8 pins (8-pin SOP/SOIC, code SSIG)
- Function: W25X40BVSSIG is a 4-Mbit serial SPI flash memory (512 KB) used for non-volatile storage. SPI interface (CS, SCK, SI, SO) plus WP, HOLD, VCC, GND; supports standard reads, fast reads, page program (256 bytes), sector/ block/chip erase.
- Function: W25X40BVSSIG is a 4-Mbit serial SPI flash memory (512 KB) used for non-volatile storage. SPI interface (CS, SCK, SI, SO) plus WP, HOLD, VCC, GND; supports standard reads, fast reads, page program (256 bytes), sector/ block/chip erase.
Manufacturer
- Manufacturer: Winbond Electronics Corp. (Winbond)
- What kind of company: A Taiwan-based semiconductor company that designs and manufactures memory ICs (e.g., serial flash, DRAM) and provides global memory solutions.
- What kind of company: A Taiwan-based semiconductor company that designs and manufactures memory ICs (e.g., serial flash, DRAM) and provides global memory solutions.
Application
Applications of W25X40BVSSIG (4 Mbit serial flash, 2.7–3.6 V, SPI/Dual-Quad I/O):
- Boot ROM and firmware storage for microcontrollers
- Firmware update reservoirs and code storage
- Data/configuration storage, calibration data, lookup tables
- Consumer electronics (digital cameras, MP3 players, set-top boxes)
- Networking gear (routers, modems)
- Industrial/automotive control systems (PLCs, instrumentation)
- Any low-pin, cost-effective SPI/dual-quad SPI flash replacement needs
- Boot ROM and firmware storage for microcontrollers
- Firmware update reservoirs and code storage
- Data/configuration storage, calibration data, lookup tables
- Consumer electronics (digital cameras, MP3 players, set-top boxes)
- Networking gear (routers, modems)
- Industrial/automotive control systems (PLCs, instrumentation)
- Any low-pin, cost-effective SPI/dual-quad SPI flash replacement needs
Package
W25X40BVSSIG uses an 8-pin SOP package (SOIC-8), RoHS/lead-free.
