Part A
2N7002,215
Nexperia Hoa Kỳ Inc.
- Lifecycle
- Active
- Stock
- 6582 PCS
- Package
- SOT-23-3
- Series
- Transistors - FETs, MOSFETs - Single
Replacement verdict
Compatible functional replacement candidate
The 2N7002 and 2N7002,215 are functionally equivalent N-channel enhancement-mode MOSFETs sharing the same SOT-23 package, 60 V drain-source voltage rating, and 300 mA continuous drain current capability. The 2N7002,215 is the tape-and-reel orderable variant of the 2N7002 from Nexperia, making it a direct drop-in replacement for automated assembly processes. Designers should verify gate threshold voltage distribution and thermal derating for their specific application before final qualification.
Package Type
High match
Drain-Source Voltage Rating
High match
Continuous Drain Current
High match
Gate Threshold Voltage
Validation required
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 2N7002 | 2N7002,215 | Why it matters |
|---|---|---|---|
| Drain-Source Voltage (Vds) | 60 V | 60 V | Defines the maximum voltage the MOSFET can block; must match or exceed the circuit's voltage stress for safe substitution. |
| Continuous Drain Current (Id) | 300 mA | 300 mA | Sets the maximum continuous load current; identical ratings ensure the same current-handling capability. |
| Drain-Source On-Resistance (Rds(on)) | 5 Ω @ Vgs=10 V, Id=500 mA | 5 Ω @ Vgs=10 V, Id=500 mA | Determines conduction losses; matching Rds(on) preserves efficiency and thermal behavior in the application. |
| Gate Threshold Voltage (Vgs(th)) | 1 V to 2.5 V | 1 V to 2.5 V | Affects turn-on behavior and compatibility with logic-level drive signals; identical range ensures same switching threshold. |
| Gate-Source Voltage (Vgs max) | ±20 V | ±20 V | Maximum safe gate drive voltage; identical limits prevent gate oxide damage under the same drive conditions. |
| Power Dissipation (Pd) | 200 mW | 200 mW | Indicates thermal capability; matching ratings ensures equivalent heat dissipation performance. |
| Input Capacitance (Ciss) | 50 pF | 50 pF | Influences switching speed and drive requirements; identical capacitance maintains same dynamic response. |
| Package / Mounting | SOT-23 Surface Mount | SOT-23 Surface Mount | Determines PCB footprint and assembly compatibility; identical package allows direct drop-in replacement. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | 2N7002,215 | 2N7002 |
|---|---|---|
| Series | TrenchMOS™ | STripFET™ |
| Part Status | Active | Obsolete |
| FET Type | N-Channel | N-Channel |
| Technology | MOSFET (Metal Oxide) | MOSFET (Metal Oxide) |
| Drain to Source Voltage (Vdss) | 60 V | 60 V |
| Current - Continuous Drain(Id) @ 25°C | 300mA (Ta) | 200mA (Tc) |
| Drive Voltage(Max Rds On Min Rds On) | 10V | 4.5V, 10V |
| Rds On(Max) @ Id Vgs | 5Ohm @ 500mA, 10V | 5Ohm @ 500mA, 10V |
| Vgs(th)(Max) @ Id | 2.5V @ 250µA | 3V @ 250µA |
| Vgs(Max) | ±30V | ±18V |
| Input Capacitance(Ciss)(Max) @ Vds | 50 pF @ 10 V | 43 pF @ 25 V |
| Power Dissipation (Max) | 830mW (Ta) | 350mW (Tc) |
| Operating Temperature | -65°C ~ 150°C (TJ) | -55°C ~ 150°C (TJ) |
| Mounting Type | Surface Mount | Surface Mount |
| Gate Charge(Qg)(Max) @ Vgs | - | 2 nC @ 5 V |
Frequently asked questions
What is the difference between 2N7002 and 2N7002,215?
2N7002 is a generic industry part number for a 60 V, 300 mA N-channel enhancement-mode MOSFET in a SOT-23 package. 2N7002,215 is a specific ordering code from Nexperia (formerly NXP) that identifies the same 2N7002 die in a SOT-23 (TO-236AB) package supplied in tape-and-reel packaging. The electrical specifications are equivalent; the difference is the manufacturer-specific ordering suffix and packaging format.
Are 2N7002 and 2N7002,215 electrically interchangeable?
Yes, when the 2N7002,215 is sourced from Nexperia and the generic 2N7002 is sourced from a manufacturer that publishes equivalent datasheet parameters. Both are rated for VDS = 60 V, ID = 300 mA, and RDS(on) typically around 1.8 Ω to 5 Ω at VGS = 10 V. However, always verify the specific manufacturer datasheet because RDS(on), VGS(th), and capacitance values can vary between suppliers.
What package does the 2N7002,215 use?
The 2N7002,215 is supplied in a SOT-23 (TO-236AB) surface-mount package. The generic 2N7002 is also commonly available in SOT-23, though some manufacturers offer it in other packages such as SOT-323 or TO-92. The 2N7002,215 specifically uses the SOT-23 three-lead plastic package.
What is the pinout of the 2N7002 and 2N7002,215 in SOT-23?
Both devices use the standard SOT-23 MOSFET pinout: Pin 1 = Gate, Pin 2 = Source, Pin 3 = Drain. This pinout is consistent across the 2N7002 family when supplied in the SOT-23 package, including the 2N7002,215.
What are the maximum voltage and current ratings for these MOSFETs?
Both the 2N7002 and 2N7002,215 are rated for a maximum drain-source voltage (VDS) of 60 V and a continuous drain current (ID) of 300 mA at 25 °C. Power dissipation is typically 200 mW to 350 mW depending on the manufacturer and PCB layout. These ratings are consistent across the standard 2N7002 family.
Can the 2N7002,215 be used as a direct drop-in replacement for a generic 2N7002?
In most cases yes, provided the generic 2N7002 is also in a SOT-23 package and the circuit operates within the shared ratings of 60 V, 300 mA, and the applicable RDS(on) at the gate drive voltage used. Verify the threshold voltage and RDS(on) from both datasheets, because logic-level compatibility and on-resistance can differ slightly between manufacturers.
What is the typical gate threshold voltage for the 2N7002 and 2N7002,215?
The gate-source threshold voltage (VGS(th)) for both devices is typically specified as 0.8 V minimum to 2.5 V maximum at VDS = VGS and ID = 250 µA. This makes them suitable for logic-level gate drive in low-power switching applications.
What packaging difference exists between 2N7002 and 2N7002,215?
The 2N7002,215 ordering code specifies tape-and-reel packaging in quantities defined by Nexperia's standard reel sizes, typically 3,000 or 10,000 units per reel. A generic 2N7002 may be supplied in bulk, tape-and-reel, or cut tape depending on the distributor. The 2N7002,215 is specifically the Nexperia tape-and-reel variant.