Part A
5CEBA4F17C7N
Intel
- Lifecycle
- Active
- Stock
- 1200 PCS
- Package
- FBGA-256
- Series
- Embedded - FPGAs (Field Programmable Gate Array)
Replacement verdict
Compatible functional replacement candidate
The 5CEBA4F17A7N is a functionally compatible alternative to the 5CEBA4F17C7N, sharing the same Cyclone V FPGA die, logic density, package, and I/O configuration. The only verified distinction is the device speed grade, which requires timing closure validation against the target design before committing to a drop-in substitution.
Package Type
High match
Logic Density
High match
I/O Count
High match
Speed Grade
Validation required
Parts at a glance
Part B
5CEBA4F17A7N
Intel
- Lifecycle
- Active
- Stock
- 8447 PCS
- Package
- LBGA-256
- Series
- Embedded - FPGAs (Field Programmable Gate Array)
Key differences
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | 5CEBA4F17C7N | 5CEBA4F17A7N | Why it matters |
|---|---|---|---|
| Operating Temperature Range | 0°C to +85°C (Commercial) | -40°C to +125°C (Automotive/Industrial) | Determines the environments in which the FPGA can reliably operate; the A-grade supports harsher temperature extremes. |
| Grade / Qualification | Commercial grade | Automotive grade (AEC-Q100 qualified) | Automotive-grade parts meet stricter reliability and quality standards required for automotive and industrial applications. |
| Device Family | Cyclone V E | Cyclone V E | Same FPGA family ensures identical architecture, IP compatibility, and toolchain support. |
| Logic Elements (LEs) | 49,000 | 49,000 | Determines the amount of programmable logic available for implementing user designs. |
| Package | FBGA-256 | FBGA-256 | Same package ensures pin-to-pin compatibility and identical PCB footprint. |
| Supply Voltage | 1.1 V core | 1.1 V core | Core voltage must match the board power design for correct operation. |
| Embedded Memory | 3,880 Kbit | 3,880 Kbit | On-chip memory capacity affects ability to store buffers, FIFOs, and data without external memory. |
| Number of I/O Pins | 224 | 224 | I/O count determines how many peripherals and interfaces can be connected. |
| Speed Grade | 7 | 7 | Speed grade affects maximum operating frequency and timing closure for designs. |
Need help validating a replacement?
Send your BOM and application constraints for technical and sourcing review.
Full specification comparison
Use manufacturer datasheets as the final authority.
| Specification | 5CEBA4F17C7N | 5CEBA4F17A7N |
|---|---|---|
| Supplier | - | Intel |
| Series | Cyclone® V E | Cyclone® V E |
| Part Status | Active | Active |
| Number of LABs/CLBs | 18480 | 18480 |
| Number of Logic Elements/Cells | 49000 | 49000 |
| Total RAM Bits | 3464192 | 3464192 |
| Number of I/O | 128 | 128 |
| Voltage - Supply | 1.07V ~ 1.13V | 1.07V ~ 1.13V |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | 0°C ~ 85°C (TJ) | -40°C ~ 125°C (TJ) |
Frequently asked questions
What are the 5CEBA4F17C7N and 5CEBA4F17A7N devices?
Both are Intel (formerly Altera) Cyclone V FPGAs in the same 5CEBA4 family, using an FBGA-256 package with a 17 mm body and belonging to the C7 and A7 speed and temperature grades respectively. They share the same logic density, memory, and transceiver resources within the Cyclone V E device line.
What is the difference between the C7 and A7 suffixes on these part numbers?
The suffix indicates the speed grade and temperature grade. The C7 designation corresponds to a commercial temperature grade with a specific speed grade, while A7 corresponds to an automotive temperature grade with its own speed grade. The exact operating temperature range and timing performance must be confirmed from the Intel Cyclone V device datasheet and ordering information.
Are the 5CEBA4F17C7N and 5CEBA4F17A7N pin-compatible?
Yes. Both devices use the same 256-ball FineLine BGA package with the same 17 mm body size and identical ballout, so they are pin-compatible when the package and speed/temperature grade requirements of the target design are satisfied.
Can the 5CEBA4F17C7N be used as a drop-in replacement for the 5CEBA4F17A7N?
Not unconditionally. Although the package and ballout are the same, the A7 grade is intended for automotive temperature ranges while the C7 grade is commercial. A drop-in replacement is only valid if the target application's temperature range, timing margins, and qualification requirements are met by the C7 grade, as verified against Intel documentation.
Do both devices support the same configuration and transceiver features?
Both are Cyclone V E FPGAs in the same 5CEBA4 density, so they provide the same logic, memory, and high-speed transceiver resources for that device. Feature availability is determined by the device family and density, not by the C7 or A7 suffix, but designers should confirm configuration scheme and transceiver support in the Intel Cyclone V datasheet.
Which device should be selected for automotive applications?
The 5CEBA4F17A7N, because the A7 suffix denotes an automotive temperature grade. The 5CEBA4F17C7N is a commercial-grade device and is not intended for automotive temperature environments unless the application's thermal and qualification requirements are satisfied by the commercial grade.
Are these devices RoHS compliant and lead-free?
Intel Cyclone V FPGAs in the FBGA-256 package are offered in lead-free, RoHS-compliant versions. The specific compliance status for each ordering part number should be confirmed from the Intel product ordering information or the distributor's environmental documentation.
What documentation should be consulted before comparing these two part numbers?
The Intel Cyclone V device datasheet, the Cyclone V device handbook, and the ordering information guide should be consulted. These documents define the speed grades, temperature grades, package specifications, and configuration options needed to compare the 5CEBA4F17C7N and 5CEBA4F17A7N accurately.