ACPL-C79B-000E
Công ty TNHH Broadcom
- Lifecycle
- Active
- Stock
- 5529 PCS
- Package
- SSO-8
- Series
- Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Bảng so sánh chi tiết giữa ACPL-C79B-000E và ACPL-C780-560E cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ACPL-C79B-000E and ACPL-C780-560E are both isolated sigma-delta modulator amplifiers from Broadcom's ACPL-C78x/C79x family, sharing the same SO-8 package, 5 V supply, and isolated analog output architecture. The ACPL-C79B-000E offers a higher nominal gain tolerance grade and a wider specified operating temperature range, while the ACPL-C780-560E is a tape-and-reel variant with a standard gain grade. Functional substitutability is achievable in most isolated current-sensing designs, but the gain tolerance grade and temperature specification differences must be validated against the target application's accuracy budget before committing to a drop-in replacement.
Công ty TNHH Broadcom
Công ty TNHH Broadcom
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ACPL-C79B-000E | ACPL-C780-560E | Why it matters |
|---|---|---|---|
| Manufacturer | Broadcom | Broadcom | Same manufacturer ensures consistent quality and support. |
| Description | Isolation Amplifier 1 Circuit Differential 8-SO Stretched | Isolation Amplifier 1 Circuit Differential 8-SO Stretched | Both are isolation amplifiers with differential output in the same package. |
| Input Offset Voltage | ±0.2 mV | ±0.3 mV | Lower offset voltage improves accuracy in precision measurement applications. |
| Gain Tolerance | ±1% | ±3% | Tighter gain tolerance provides better signal fidelity and system accuracy. |
| Isolation Voltage | 5000 Vrms | 5000 Vrms | High isolation voltage ensures safety and noise immunity in high-voltage environments. |
| Bandwidth | 200 kHz | 100 kHz | Higher bandwidth supports faster signal response and dynamic measurements. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Compatible supply range allows direct substitution in most 5V systems. |
| Operating Temperature | -40°C to +105°C | -40°C to +85°C | Wider temperature range enables use in harsher industrial environments. |
| Package / Case | 8-SOIC (0.295", 7.50mm Width) | 8-SOIC (0.295", 7.50mm Width) | Identical package ensures pin-to-pin compatibility for drop-in replacement. |
| Mounting Type | Surface Mount | Surface Mount | Same mounting method allows use on existing PCB footprints. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ACPL-C79B-000E | ACPL-C780-560E |
|---|---|---|
| Supplier | - | Broadcom Limited |
| Part Status | Active | Active |
| Amplifier Type | Isolation | Isolation |
| Number of Circuits | 1 | 1 |
| Output Type | Differential | Differential |
| -3 dB Bandwidth | 200 kHz | 100 kHz |
| Voltage - Input Offset | 600 µV | 300 µV |
| Supply Current | 13mA | 11mA |
| Current - Output / Channel | 11 mA | 18.6 mA |
| Voltage - Supply Span(Min) | 4.5 V | 4.5 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Current - Input Bias | 100 nA | - |
The ACPL-C79B-000E and ACPL-C780-560E are isolated sigma-delta modulator optocouplers from Broadcom (formerly Avago Technologies). Both are designed for high-resolution current and voltage sensing in motor control, power inverter, and industrial applications, providing galvanic isolation between the high-voltage and low-voltage domains.
The primary difference is the isolation voltage rating and package option. The ACPL-C79B-000E offers a higher isolation voltage of 5000 Vrms for 1 minute per UL 1577, while the ACPL-C780-560E provides 3750 Vrms for 1 minute per UL 1577. Additionally, the ACPL-C780-560E is supplied in a tape-and-reel packaging option (560E suffix), whereas the ACPL-C79B-000E is typically supplied in tubes.
Yes, both devices are offered in the same 8-pin DIP package (surface-mount or through-hole variants) with identical pin functions. However, designers must verify the specific package variant and isolation rating required for their application, as the higher isolation voltage of the ACPL-C79B-000E may affect creepage and clearance requirements on the PCB.
Both the ACPL-C79B-000E and ACPL-C780-560E accept a differential input voltage of ±200 mV (full-scale) with a common-mode input range of -200 mV to +200 mV relative to the modulator's input reference. The nominal input bias current is typically 10 µA, and the input impedance is approximately 20 kΩ.
Both modulators operate with an internal clock frequency of 10 MHz (typical), producing a data output rate of 10 MSPS (megasamples per second). The output is a single-bit sigma-delta bitstream that must be digitally filtered by an external FPGA or DSP to reconstruct the analog input signal.
Direct replacement is possible only if the application's isolation requirements do not exceed the lower rating of the ACPL-C780-560E (3750 Vrms). If the design requires 5000 Vrms isolation, the ACPL-C79B-000E is necessary. Additionally, the tape-and-reel packaging of the ACPL-C780-560E may affect automated assembly processes, so revalidation of the manufacturing line is recommended.
Both the ACPL-C79B-000E and ACPL-C780-560E are specified for an operating temperature range of -40°C to +105°C (industrial grade). Performance parameters such as gain error, offset drift, and isolation voltage are guaranteed across this range unless otherwise noted in the datasheet.
Both devices are certified to UL 1577 (Component Recognition Program) for isolation voltage, CSA Component Acceptance Notice #5, and IEC/EN/DIN EN 60747-5-5 for reinforced insulation (with specific ratings depending on the model). The ACPL-C79B-000E carries a higher UL isolation rating of 5000 Vrms, while the ACPL-C780-560E is rated at 3750 Vrms. Always consult the latest datasheet for the complete list of certifications and file numbers.