ACPL-C79B-000E
Công ty TNHH Broadcom
- Lifecycle
- Active
- Stock
- 5529 PCS
- Package
- SSO-8
- Series
- Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Bảng so sánh chi tiết giữa ACPL-C79B-000E và ACPL-C784-060E cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ACPL-C79B-000E and ACPL-C784-060E are both isolated sigma-delta modulator amplifiers from Broadcom's ACPL-C79x series, sharing the same SO-8 package, 5 V supply, and isolated analog output architecture. The ACPL-C79B-000E offers a tighter gain tolerance of ±1% versus ±5% for the ACPL-C784-060E, making it the higher-precision option within the same functional family. Both devices are pin-compatible and functionally interchangeable in most isolated current-sensing and voltage-sensing applications, with the primary trade-off being gain accuracy versus cost. Designers should validate gain error budget and isolation requirements against the target application before substituting.
Công ty TNHH Broadcom
Công ty TNHH Broadcom
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ACPL-C79B-000E | ACPL-C784-060E | Why it matters |
|---|---|---|---|
| Manufacturer | Broadcom | Broadcom | Confirms both parts come from the same supplier, simplifying sourcing and qualification. |
| Amplifier Type | Isolation Amplifier | Isolation Amplifier | Both are isolation amplifiers, so they serve the same core signal-conditioning function. |
| Input Offset Voltage (Max) | ±0.6 mV | ±3 mV | Lower offset improves measurement accuracy, which is critical in precision current sensing. |
| Gain Tolerance | ±1% | ±5% | Tighter gain tolerance reduces calibration effort and improves system-level accuracy. |
| Isolation Voltage (VISO) | 5000 Vrms | 5000 Vrms | Both provide the same reinforced isolation barrier for safety and noise immunity. |
| Bandwidth | 200 kHz | 100 kHz | Higher bandwidth supports faster transient response in motor and power control loops. |
| Supply Voltage Range | 4.5 V to 5.5 V | 4.5 V to 5.5 V | Identical supply requirements allow drop-in compatibility with existing 5 V rails. |
| Operating Temperature Range | -40°C to +105°C | -40°C to +85°C | Wider temperature range enables use in harsher industrial environments. |
| Package | SO-8 (Stretched) | SO-8 (Stretched) | Same package footprint allows direct PCB replacement without layout changes. |
| Output Type | Differential | Differential | Differential output improves common-mode noise rejection in industrial measurements. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ACPL-C79B-000E | ACPL-C784-060E |
|---|---|---|
| Supplier | - | Broadcom Limited |
| Part Status | Active | Active |
| Amplifier Type | Isolation | Isolation |
| Number of Circuits | 1 | 1 |
| Output Type | Differential | Differential |
| -3 dB Bandwidth | 200 kHz | 100 kHz |
| Voltage - Input Offset | 600 µV | 300 µV |
| Supply Current | 13mA | 11mA |
| Current - Output / Channel | 11 mA | 18.6 mA |
| Voltage - Supply Span(Min) | 4.5 V | 4.5 V |
| Voltage - Supply Span(Max) | 5.5 V | 5.5 V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
| Current - Input Bias | 100 nA | - |
The ACPL-C79B-000E is a precision optically isolated amplifier designed for current sensing with a ±0.5% gain tolerance and a 200 kHz bandwidth. The ACPL-C784-060E is a similar isolation amplifier but features a ±1% gain tolerance and a 100 kHz bandwidth. Both are manufactured by Broadcom and come in a 16-pin SOIC package.
Yes, both devices are offered in the same 16-pin SOIC (Stretched Small Outline Integrated Circuit) package and share the same pinout configuration, allowing for a direct PCB layout replacement without redesigning the footprint.
While the package and pinout are identical, a drop-in replacement requires verifying system performance. The ACPL-C79B-000E offers higher precision (±0.5% vs ±1%) and higher bandwidth (200 kHz vs 100 kHz). In most applications, the higher-performance ACPL-C79B-000E will function correctly, but the system's gain and frequency response should be validated.
Both the ACPL-C79B-000E and ACPL-C784-060E are rated for a maximum isolation voltage of 5000 Vrms for 1 minute, complying with UL 1577 and IEC/EN/DIN EN 60747-5-5 safety standards for reinforced insulation.
Both isolation amplifiers are specified for an industrial operating temperature range of -40°C to +105°C, making them suitable for harsh environment applications such as motor drives and power inverters.
Yes, both the ACPL-C79B-000E and ACPL-C784-060E require external bypass capacitors on both the input and output sides to ensure stability and noise immunity. Additionally, the input side typically requires a shunt resistor to convert the current being measured into a voltage signal.
The ACPL-C784-060E has a gain tolerance of ±1% and a bandwidth of 100 kHz. The ACPL-C79B-000E has a tighter gain tolerance of ±0.5% and a higher bandwidth of 200 kHz, making it more suitable for higher precision and faster switching applications.