AD8302ARUZ-RL7 vs AD8309ARUZ

Bảng so sánh chi tiết giữa AD8302ARUZ-RL7 và AD8309ARUZ cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AD8309ARUZ and AD8302ARUZ-RL7 are not drop-in replacements for one another. Although both are analog logarithmic/RF detection ICs in the same TSSOP-16 package family, they serve fundamentally different functions: the AD8309ARUZ is a single-channel logarithmic amplifier/RSSI detector, while the AD8302ARUZ-RL7 is a dual-channel gain and phase detector. Their output types, channel counts, and core measurement functions differ, so substituting one for the other requires circuit redesign and validation.

Different output type Different channel count Different measurement function Different pin function assignment

Parts at a glance

Part A

AD8302ARUZ-RL7

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
2916 PCS
Package
TSSOP-14
Series
RF Detectors
Part B

AD8309ARUZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
6696 PCS
Package
TSSOP-16
Series
Linear - Amplifiers - Special Purpose

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AD8309ARUZ AD8302ARUZ-RL7 Why it matters
Function Demodulating logarithmic amplifier (RSSI) RF/IF gain and phase detector These are fundamentally different signal-processing functions, so they are not direct substitutes in a circuit.
Frequency Range 5 MHz to 500 MHz DC to 2.7 GHz Operating frequency range determines whether the part can be used in the target signal band.
Primary Output Logarithmic (RSSI) voltage proportional to input level Two outputs: gain (magnitude ratio) and phase difference The output type dictates what the downstream circuitry can measure (signal strength vs. gain/phase).
Dynamic Range Approximately 100 dB Approximately 60 dB (gain measurement range) Dynamic range defines the span of input levels over which the device provides usable measurement accuracy.
Supply Voltage 2.7 V to 6.5 V 2.7 V to 5.5 V Supply voltage compatibility affects whether the part can share the same power rail as the rest of the system.
Package 16-lead TSSOP 14-lead TSSOP Different package pin counts and footprints prevent drop-in board replacement.
Number of Channels 1 (single logarithmic channel) 2 (dual input for ratio/phase comparison) Channel count determines whether the device can compare two signals or only measure one.
Typical Application Received signal strength indication (RSSI), power measurement Gain and phase measurement, VSWR/return loss monitoring Application focus indicates the intended measurement role and helps assess functional substitutability.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AD8302ARUZ-RL7 AD8309ARUZ
Part Status Active Active
Frequency 2.7GHz -
RF Type General Purpose -
Input Range -60dBm ~ 0dBm -
Accuracy ±0.5dB -
Voltage - Supply 2.7V ~ 5.5V -
Supply Current 23 mA -
Mounting Type Surface Mount Surface Mount
Type - Logarithmic Amplifier
Applications - Receiver Signal Strength Indication (RSSI)

Frequently asked questions

What are the primary functional differences between the AD8309ARUZ and the AD8302ARUZ-RL7?

The AD8309ARUZ is a demodulating logarithmic amplifier (log amp) that provides a RSSI (received signal strength indicator) output proportional to the logarithm of the input signal, and is specified for operation from DC to 500 MHz. The AD8302ARUZ-RL7 is a gain and phase detector that measures the amplitude ratio (gain/loss) and phase difference between two independent input signals, operating from low frequency up to 2.7 GHz. In short, the AD8309 measures the magnitude of a single signal, while the AD8302 compares two signals in both amplitude and phase.

Are the AD8309ARUZ and AD8302ARUZ-RL7 pin-compatible and directly interchangeable?

No. Although both devices are offered in a 16-lead TSSOP package (RU suffix), their pin functions and internal architectures differ. The AD8309 provides a single RF input with logarithmic/RSSI output and limiter output, whereas the AD8302 provides two matched input channels (INPA and INPB) plus VMAG and VPHS outputs. A direct drop-in substitution is not possible; the PCB layout and external matching networks must be redesigned for the target function.

What frequency range does each device support?

The AD8309ARUZ is specified for operation from DC to 500 MHz, making it suitable for HF/VHF/UHF RSSI and received signal strength measurement. The AD8302ARUZ-RL7 operates from low frequency up to 2.7 GHz, covering a much wider range appropriate for RF gain and phase measurement in applications such as PA linearization and VSWR monitoring.

What output signals does each device provide?

The AD8309ARUZ provides a logarithmic (RSSI) voltage output that is linearly proportional to the input signal level in dB, along with a limited output for FM/FSK demodulation. The AD8302ARUZ-RL7 provides two outputs: VMAG, a voltage proportional to the magnitude ratio (gain) between the two inputs, and VPHS, a voltage proportional to the phase difference between them.

Which device is better suited for measuring gain and phase of an RF amplifier or transmission line?

The AD8302ARUZ-RL7 is the appropriate choice. It is specifically designed as a gain and phase detector with two matched channels, delivering VMAG and VPHS outputs that directly represent the amplitude ratio and phase difference between two signals. The AD8309ARUZ, being a single-channel log amp, cannot measure phase or the ratio between two signals.

Which device should be selected for RSSI or received signal strength measurement?

The AD8309ARUZ is intended for RSSI and logarithmic signal-strength measurement of a single input, with a wide dynamic range and a logarithmic output. The AD8302ARUZ-RL7 is not designed as a single-channel RSSI detector; it requires two input signals and outputs gain and phase information, so it is not a substitute for RSSI functionality.

Do both parts share the same package and supply voltage requirements?

Both devices are supplied in a 16-lead TSSOP (RU) package and operate from a single positive supply in the 2.7 V to 5.5 V range, per their respective datasheets. However, because their pinouts and internal functions differ, the surrounding circuitry, decoupling, and input/output interfaces must be designed separately for each part.