AD8400ARZ1
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 4740 PCS
- Package
- SOIC-8
- Series
- Data Acquisition - Digital Potentiometers
Bảng so sánh chi tiết giữa AD8400ARZ1 và AD8402AR1 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The AD8400ARZ1 and AD8402AR1 are both single-channel digital potentiometers from the AD840x family, but they differ in resolution, package, and interface configuration, so they are not interchangeable in a design without validation. The AD8400ARZ1 offers 1 kΩ end-to-end resistance in an 8-lead SOIC package, while the AD8402AR1 provides 1 kΩ resistance in a 14-lead SOIC package with a different internal architecture. Designers must verify footprint, resolution, and interface compatibility before considering substitution.
Công ty Analog Devices Inc.
Công ty Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8400ARZ1 | AD8402AR1 | Why it matters |
|---|---|---|---|
| Number of Resistor Channels | 1 | 2 | Determines how many independent digital potentiometer channels are available; a single-channel part cannot replace a dual-channel part in circuits requiring two adjustable resistances. |
| End-to-End Resistance | 1 kΩ | 1 kΩ | Sets the nominal full-scale resistance range; matching values ensures the same adjustment span and current levels in the target circuit. |
| Resolution (Number of Positions) | 256 positions (8-bit) | 256 positions (8-bit) | Defines the step granularity of resistance adjustment; identical resolution preserves the same wiper step size and control precision. |
| Digital Interface | SPI (3-wire serial) | SPI (3-wire serial) | The communication protocol must match the host controller; both use the same serial interface, allowing firmware reuse. |
| Supply Voltage Range | 2.7 V to 5.5 V | 2.7 V to 5.5 V | Determines compatibility with the system power rail; identical ranges allow operation in the same voltage domain. |
| Package / Mounting | 8-lead SOIC (surface mount) | 14-lead SOIC (surface mount) | Footprint and pin count differ, so the PCB layout must accommodate the larger 14-lead package for the dual-channel device. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Confirms both parts are rated for the same industrial temperature environment, ensuring reliable operation under identical conditions. |
| Wiper Current Rating | 5 mA (typical max) | 5 mA (typical max) | Limits the load current the wiper can handle; matching ratings ensures the same drive capability for the connected load. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8400ARZ1 | AD8402AR1 |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Taper | Linear | Linear |
| Configuration | Potentiometer | Potentiometer |
| Number of Circuits | 1 | 2 |
| Number of Taps | 256 | 256 |
| Resistance(Ohms) | 1k | 1k |
| Interface | SPI | SPI |
| Memory Type | Volatile | Volatile |
| Voltage - Supply | 2.7V ~ 5.5V | 2.7V ~ 5.5V |
| Tolerance | ±33% | ±33% |
| Temperature Coefficient(Typ) | 700ppm/°C | 500ppm/°C |
| Mounting Type | Surface Mount | Surface Mount |
| Operating Temperature | -40°C ~ 125°C | -40°C ~ 125°C |
The AD8400ARZ1 is a single-channel, 1 kΩ digital potentiometer in an 8-lead SOIC package, while the AD8402AR1 is a dual-channel, 1 kΩ digital potentiometer in a 14-lead SOIC package. Both are 256-position devices from Analog Devices with an SPI-compatible serial interface, but they differ in channel count and package pin count.
No. The AD8400ARZ1 uses an 8-lead SOIC package, whereas the AD8402AR1 uses a 14-lead SOIC package. The different pin counts and pinouts mean they are not drop-in replacements for each other and require different PCB footprints.
Both the AD8400ARZ1 and AD8402AR1 are the 1 kΩ resistance option in the AD8400/AD8402 family, offering 256 programmable positions (8-bit resolution) across the end-to-end resistance.
Yes. Both the AD8400ARZ1 and AD8402AR1 use a 3-wire SPI-compatible serial interface (SDI, SDO, and CLK) with a chip select input, allowing daisy-chaining and microcontroller control. The AD8402AR1 provides independent control of two channels through the same interface.
Both devices operate from a single supply of 2.7 V to 5.5 V, making them suitable for low-voltage digital control applications. They also feature a power-on reset that sets the wiper to midscale.
Choose the AD8402AR1 when your design requires two independently programmable resistance channels in a single package, such as dual gain control or stereo level adjustment. Choose the AD8400ARZ1 when only one channel is needed and board space is limited, since it occupies a smaller 8-lead SOIC footprint.
Yes. Both the AD8400ARZ1 and AD8402AR1 are specified for the industrial temperature range of −40 °C to +85 °C, as documented in the Analog Devices AD8400/AD8402/AD8403 datasheet.