AD8421BRZ
Công ty Analog Devices Inc.
- Lifecycle
- Active
- Stock
- 1263 PCS
- Package
- SOIC-8
- Series
- Linear - Amplifiers - Instrumentation, OP Amps, Buffer Amps
Bảng so sánh chi tiết giữa AD8421BRZ và AD8428ARZ-RL cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The AD8421BRZ and AD8428ARZ-RL are both precision instrumentation amplifiers from Analog Devices sharing a common SOIC-8 footprint and similar supply architecture, but they are not direct drop-in substitutes. The AD8421BRZ offers lower noise and wider bandwidth for general-purpose precision signal conditioning, while the AD8428ARZ-RL is a fixed-gain (G=2000) current-sense amplifier optimized for high-side shunt monitoring. Designers must validate gain configuration, input common-mode range, and bandwidth requirements before substituting one for the other in a given application.
Công ty Analog Devices Inc.
Công ty Analog Devices Inc.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AD8421BRZ | AD8428ARZ-RL | Why it matters |
|---|---|---|---|
| Number of Amplifiers | 1 | 1 | Both are single-channel instrumentation amplifiers, so channel count is not a differentiator for substitutability. |
| Gain Bandwidth Product (GBW) | 10 MHz | 3.5 MHz | Higher GBW allows the amplifier to maintain accurate gain at higher signal frequencies; the AD8421 supports wider-bandwidth signals. |
| Input Voltage Noise (1 kHz) | 3 nV/√Hz | 1.5 nV/√Hz | Lower input voltage noise improves signal-to-noise ratio for low-level signals; the AD8428 is better suited to very low-noise applications. |
| Input Offset Voltage (max) | 60 µV | 25 µV | Lower offset voltage reduces DC error at the output, which is critical for precision measurement and high-gain configurations. |
| Input Bias Current (max) | 1 nA | 3 nA | Lower bias current minimizes errors when interfacing with high-impedance sources such as sensors and transducers. |
| CMRR (G=100, DC to 60 Hz) | 120 dB | 130 dB | Higher common-mode rejection suppresses interference and ground noise; the AD8428 offers superior rejection for noisy environments. |
| Supply Voltage Range | ±2.5 V to ±18 V | ±4 V to ±18 V | The wider low-end supply range of the AD8421 allows operation at lower supply voltages, affecting compatibility with low-voltage systems. |
| Quiescent Supply Current (max) | 2.3 mA | 6.5 mA | Lower quiescent current reduces power consumption, which is important for battery-powered and thermally constrained designs. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Identical temperature ratings mean both parts are interchangeable for industrial temperature environments. |
| Package | 8-Lead SOIC | 8-Lead SOIC | Matching package and pinout enables drop-in replacement on the same PCB footprint. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AD8421BRZ | AD8428ARZ-RL |
|---|---|---|
| Supplier | - | Analog Devices Inc.,Rochester Electronics, LLC |
| Part Status | Active | Active |
| Amplifier Type | Instrumentation | Instrumentation |
| Number of Circuits | 1 | 1 |
| Slew Rate | 35V/µs | 50V/µs |
| -3 dB Bandwidth | 10 MHz | 3.5 MHz |
| Current - Input Bias | 100 pA | 200 nA |
| Voltage - Input Offset | 25 µV | 100 µV |
| Supply Current | 2mA | 6.5mA |
| Current - Output / Channel | 65 mA | 30 mA |
| Voltage - Supply Span(Min) | 5 V | 8 V |
| Voltage - Supply Span(Max) | 36 V | 36 V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Mounting Type | Surface Mount | Surface Mount |
The AD8421BRZ is a low-power, low-noise instrumentation amplifier with a fixed gain of 10 and a bandwidth of 10 MHz, housed in an 8-lead SOIC package. The AD8428ARZ-RL is a high-speed, low-noise instrumentation amplifier with a fixed gain of 2000 and a bandwidth of 3.5 MHz, supplied in a 8-lead SOIC package on tape and reel. The AD8428ARZ-RL is optimized for high gain and low noise in applications such as current sensing, while the AD8421BRZ offers lower power consumption and wider bandwidth at lower gain.
No, they are not directly interchangeable. The AD8421BRZ has a fixed gain of 10, whereas the AD8428ARZ-RL has a fixed gain of 2000. Additionally, their bandwidth, supply current, and input voltage noise specifications differ significantly. A redesign of the gain-setting network and verification of stability, bandwidth, and power budget would be required before substitution.
Both the AD8421BRZ and AD8428ARZ-RL operate from dual supplies of ±2.5 V to ±18 V (or single supply of 5 V to 36 V). This wide supply range allows both parts to interface with a variety of signal sources and ADC input ranges.
The AD8421BRZ has an input voltage noise density of 3 nV/√Hz at 1 kHz. The AD8428ARZ-RL has an input voltage noise density of 1.5 nV/√Hz at 1 kHz. The AD8428ARZ-RL provides lower input-referred noise, which is beneficial for high-gain, low-level signal amplification.
The AD8421BRZ has a fixed gain of 10 and a -3 dB bandwidth of 10 MHz. The AD8428ARZ-RL has a fixed gain of 2000 and a -3 dB bandwidth of 3.5 MHz. The AD8421BRZ is suited for wider-bandwidth applications at moderate gain, while the AD8428ARZ-RL is intended for high-gain, low-frequency precision measurements.
Both devices are offered in an 8-lead SOIC package. The AD8421BRZ is supplied in tube or tray format, while the AD8428ARZ-RL is supplied on a 13-inch reel with 2500 units per reel (RL suffix). The package footprint and pinout are identical, but the gain configuration and electrical specifications differ.
The AD8428ARZ-RL is better suited for high-side current sensing because its fixed gain of 2000 amplifies the small shunt voltage to a usable level while maintaining low input noise (1.5 nV/√Hz). The AD8421BRZ, with a fixed gain of 10, would require a larger shunt resistor or additional gain stage, which may increase power dissipation and complexity.
The AD8421BRZ draws a typical quiescent supply current of 2.3 mA. The AD8428ARZ-RL draws a typical quiescent supply current of 6.5 mA. The AD8421BRZ is more power-efficient, making it preferable for battery-powered or low-power instrumentation.