ADM3050EBRWZ vs ADM3076EARZ

Bảng so sánh chi tiết giữa ADM3050EBRWZ và ADM3076EARZ cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADM3076EARZ and ADM3050EBRWZ are both isolated RS-485 transceivers from Analog Devices, but they differ in isolation technology, data rate, and package. The ADM3050EBRWZ offers higher data rates and reinforced isolation, while the ADM3076EARZ provides a lower-speed, lower-cost option. Designers should validate supply voltage, bus loading, and isolation requirements before substituting one for the other.

Isolation Voltage Validation required
Data Rate Not compatible
Package Type Validation required
Supply Voltage High match

Parts at a glance

Part A

ADM3050EBRWZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
5661 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers
Part B

ADM3076EARZ

Công ty Analog Devices Inc.

Lifecycle
Active
Stock
5876 PCS
Package
SOIC-14
Series
Interface - Drivers, Receivers, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADM3076EARZ ADM3050EBRWZ Why it matters
Function / Protocol RS-485/RS-422 transceiver Isolated CAN transceiver (CAN FD capable) These devices serve entirely different bus protocols, so they are not functionally interchangeable in a given network.
Isolation Non-isolated Galvanically isolated (5 kV rms) Isolation determines safety, ground-loop immunity, and suitability for harsh or high-voltage environments.
Data Rate Up to 16 Mbps Up to 12 Mbps (CAN FD) Maximum data rate must match the bus speed requirements of the application.
Supply Voltage 3.3 V single supply 5 V (VCC) with 3.3 V/5 V logic supply (VIO) Supply voltage compatibility affects power rail design and logic-level interfacing.
Duplex / Channel Type Full-duplex RS-485 Half-duplex CAN (single channel) Duplex configuration determines wiring topology and whether simultaneous transmit/receive is possible.
Package 8-lead SOIC (R-8) 16-lead SOIC (RW-16) Package footprint and pin count must match the PCB layout for a drop-in replacement.
Operating Temperature Range -40 °C to +85 °C -40 °C to +105 °C Temperature range affects reliability in industrial and automotive environments.
ESD Protection (Bus Pins) ±15 kV (HBM) on bus pins ±10 kV (IEC 61000-4-2) on bus pins ESD robustness influences field reliability and the need for external protection components.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADM3050EBRWZ ADM3076EARZ
Series iCoupler® -
Part Status Active Active
Type Transceiver, Isolated Transceiver
Protocol CAN RS422, RS485
Number of Drivers/Receivers 1/1 1/1
Data Rate 12Mbps 16Mbps
Voltage - Supply 0.5V ~ 6V 3V ~ 3.6V
Operating Temperature -40°C ~ 125°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount
Duplex - Full
Receiver Hysteresis - 100 mV

Frequently asked questions

What are the primary functional differences between the ADM3076EARZ and the ADM3050EBRWZ?

The ADM3076EARZ is a 3.3 V, ±15 kV ESD protected, half-duplex RS-485/RS-422 transceiver specified for data rates up to 16 Mbps. The ADM3050EBRWZ is a 5 kV rms isolated, CAN FD transceiver compliant with ISO 11898-2:2016, supporting data rates up to 12 Mbps. They serve different bus protocols (RS-485 vs. CAN) and are not functionally interchangeable.

Are the ADM3076EARZ and ADM3050EBRWZ pin-to-pin compatible?

No. The ADM3076EARZ is offered in an 8-lead SOIC_N package, while the ADM3050EBRWZ is offered in a 16-lead SOIC_W package with different pin functions. The pinouts, package widths, and PCB land patterns differ, so they cannot be dropped into the same footprint.

What are the supply voltage requirements for each device?

The ADM3076EARZ operates from a single 3.3 V supply (3.0 V to 3.6 V). The ADM3050EBRWZ requires two supplies: VCC1 (1.7 V to 5.5 V) on the logic side and VCC2 (4.5 V to 5.5 V) on the isolated bus side, with an integrated isolated DC-to-DC converter.

Does the ADM3050EBRWZ provide galvanic isolation, and does the ADM3076EARZ?

The ADM3050EBRWZ provides 5 kV rms galvanic isolation between the logic side and the CAN bus side, rated per UL 1577 and CSA. The ADM3076EARZ is a non-isolated RS-485/RS-422 transceiver and does not provide galvanic isolation; external isolation would be required if needed.

What bus protocols and data rates do these devices support?

The ADM3076EARZ supports RS-485 and RS-422 half-duplex communication at data rates up to 16 Mbps. The ADM3050EBRWZ supports CAN FD per ISO 11898-2:2016 at data rates up to 12 Mbps. The two devices target different fieldbus standards and cannot communicate directly with each other.

What ESD protection levels are specified for each part?

The ADM3076EARZ specifies ±15 kV ESD protection on the RS-485 bus pins using the human body model (HBM). The ADM3050EBRWZ specifies bus-pin ESD protection per the IEC 61000-4-2 standard; designers should consult the respective datasheets for the exact tested levels and conditions.

Can the ADM3076EARZ be used as a direct replacement for the ADM3050EBRWZ in a CAN network?

No. The ADM3076EARZ is an RS-485/RS-422 transceiver and does not implement the CAN or CAN FD differential signaling, arbitration, or ISO 11898-2 physical layer required for a CAN network. A CAN application requiring isolation should use the ADM3050EBRWZ or an equivalent isolated CAN transceiver.

What are the operating temperature ranges for these devices?

Both the ADM3076EARZ and the ADM3050EBRWZ are specified over the industrial temperature range of −40 °C to +85 °C. Designers should confirm the exact grade and suffix against the manufacturer datasheet for the specific orderable part number.