ADS1259IPWR vs ADS1203IPWR

Bảng so sánh chi tiết giữa ADS1259IPWR và ADS1203IPWR cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS1259IPWR and ADS1203IPWR are not functionally interchangeable. The ADS1259IPWR is a 24-bit delta-sigma ADC with an SPI interface and integrated PGA, while the ADS1203IPWR is a 16-bit delta-sigma modulator with a single-bit output stream. They differ in resolution, output interface, channel architecture, and package pinout, so the ADS1203IPWR cannot directly replace the ADS1259IPWR in existing designs without significant redesign.

Different output interface Different resolution Different channel architecture Different package pinout

Parts at a glance

Part A

ADS1259IPWR

Texas Dụng cụ

Lifecycle
Active
Stock
6414 PCS
Package
TSSOP-20
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

ADS1203IPWR

Texas Dụng cụ

Lifecycle
Active
Stock
3345 PCS
Package
TSSOP-8
Series
Data Acquisition - ADCs-DACs - Special Purpose

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS1259IPWR ADS1203IPWR Why it matters
Resolution 24 bit 16 bit Higher resolution enables finer measurement granularity; the 24-bit device suits precision DC sensing while the 16-bit device is adequate for motor control and isolated feedback.
Architecture Delta-Sigma (low-noise, DC-focused) Delta-Sigma modulator (current-output) The ADS1259 integrates a full ADC with digital filter, while the ADS1203 is a modulator requiring external digital filtering, affecting system complexity and substitutability.
Output Interface SPI (serial) 1-bit modulator bitstream Different output formats mean the host must support either SPI readout or a sinc/decimation filter, so they are not drop-in interchangeable.
Input Type Differential (single channel) Differential (single channel) Both accept differential inputs, but the ADS1259 targets direct voltage sensing while the ADS1203 is typically used for isolated current sensing via shunt.
Data Rate / Sample Rate Up to 2.5 kSPS (programmable) Up to 10 MHz modulator clock The ADS1259 offers programmable low-speed precision conversion, whereas the ADS1203's high modulator clock supports fast oversampling for control loops.
Supply Voltage Analog 5 V, Digital 2.7–5.25 V 5 V (single supply) Supply requirements affect board-level compatibility; the ADS1259 needs a separate analog supply rail while the ADS1203 runs from a single 5 V rail.
Package TSSOP-20 TSSOP-16 Different pin counts and footprints prevent direct PCB substitution without layout changes.
Typical Application Precision industrial measurement, weigh scales, temperature/pressure sensing Motor control, isolated current sensing, power monitoring Target applications differ significantly, so functional substitutability is limited to cases where a modulator-based current-sense path can replace a precision ADC path.
Internal Reference Yes (integrated reference) No (external reference required) An integrated reference simplifies precision designs; the ADS1203 requires an external reference, adding components and design effort.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS1259IPWR ADS1203IPWR
Supplier - Texas Instruments,Rochester Electronics, LLC
Part Status Active Obsolete
Type - Modulator
Number of Channels - 1
Resolution(Bits) - 16 b
Sampling Rate(Per Second) 14k 40k
Data Interface SPI Serial
Voltage Supply Source - Single Supply
Voltage - Supply - 4.75V ~ 5.25V
Operating Temperature -40°C ~ 105°C -40°C ~ 125°C
Mounting Type - Surface Mount
Number of Bits 24 -
Number of Inputs 1 -
Input Type Differential, Single Ended -
Configuration ADC -
Number of A/D Converters 1 -
Architecture Sigma-Delta -
Reference Type External -
Voltage - Supply, Analog 5V -
Voltage - Supply, Digital 2.7V ~ 5.25V -
Features PGA -

Frequently asked questions

What are the primary functional differences between the ADS1259IPWR and ADS1203IPWR?

The ADS1259IPWR is a 24-bit, 14.4-kSPS delta-sigma analog-to-digital converter with an integrated low-noise PGA, designed for precision DC and low-frequency measurements. The ADS1203IPWR is a 16-bit, 10-MHz clock delta-sigma modulator that outputs a 1-bit data stream for isolated or high-speed signal-chain applications requiring external digital filtering. They differ fundamentally in resolution, output format, and intended signal bandwidth.

Are the ADS1259IPWR and ADS1203IPWR pin-to-pin compatible?

No. Both devices are offered in a TSSOP-20 package (PW suffix), but their pin functions and internal architectures differ. The ADS1259IPWR provides a complete ADC with serial interface, reference, and PGA control pins, while the ADS1203IPWR provides modulator clock, data, and control pins. A direct PCB drop-in replacement is not supported without design changes.

What are the resolution and data-rate specifications of each device?

The ADS1259IPWR offers 24-bit resolution with programmable data rates up to 14.4 kSPS. The ADS1203IPWR is a 16-bit delta-sigma modulator that produces a 1-bit output stream at a 10-MHz modulator clock, with effective resolution determined by the external digital filter and decimation ratio.

Which device is better suited for isolated signal acquisition?

The ADS1203IPWR is typically preferred for isolated signal acquisition because its 1-bit modulator output can be transmitted across an isolation barrier with a single digital isolator channel, and filtering is performed on the isolated or non-isolated side. The ADS1259IPWR integrates the full ADC function and is intended for non-isolated precision measurement systems.

Do both devices support the same supply voltage ranges?

No. The ADS1259IPWR operates from an analog supply of 5 V (4.75 V to 5.25 V) and a digital supply of 2.7 V to 5.25 V. The ADS1203IPWR operates from a single 5-V supply (4.5 V to 5.5 V). Designers must verify supply rails against the respective datasheet before substitution.

What interface does each device provide to a host controller?

The ADS1259IPWR provides a SPI-compatible serial interface for configuration and reading conversion results. The ADS1203IPWR provides a 1-bit modulator data output and a modulator clock input; the host or an external digital filter performs decimation and conversion to a multi-bit result.

Can the ADS1203IPWR replace the ADS1259IPWR in an existing precision measurement design?

No, not directly. The ADS1203IPWR lacks an integrated digital filter, PGA, and SPI result interface, and it provides only 16-bit modulator resolution versus the 24-bit ADC output of the ADS1259IPWR. Replacement would require adding an external digital filter, reworking the PCB, and revalidating accuracy, noise, and timing performance.