ADS1259IPWR
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 6414 PCS
- Package
- TSSOP-20
- Series
- Data Acquisition - Analog to Digital Converters (ADC)
Bảng so sánh chi tiết giữa ADS1259IPWR và ADS1208IPWR cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS1259IPWR and ADS1208IPWR are not drop-in replacements for one another. Although both are single-channel delta-sigma analog-to-digital converters in a TSSOP-20 package, they differ fundamentally in resolution, output interface, and modulator architecture, so the ADS1208IPWR cannot be substituted directly for the ADS1259IPWR without redesigning the digital interface and signal chain.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS1259IPWR | ADS1208IPWR | Why it matters |
|---|---|---|---|
| Resolution (bits) | 24 | 16 | Resolution determines the smallest signal change the ADC can distinguish; a 24-bit device offers far finer measurement granularity than a 16-bit device. |
| Architecture | Delta-Sigma (low-speed, high-resolution) | Delta-Sigma modulator (current-shunt oriented) | The converter architecture dictates noise shaping, bandwidth, and the type of signal chain the part is designed to serve. |
| Output Interface | SPI (serial) | Digital modulator bitstream (1-bit) | The output format determines how the host or downstream filter must interface with the device; these two are not directly interchangeable. |
| Input Type | Differential analog voltage input | Differential current-shunt input | The intended input signal type affects whether the part can be dropped into a given sensing circuit without additional conditioning. |
| Supply Voltage | 5 V analog supply (with separate digital supply) | 5 V single supply | Supply requirements affect board-level power design and whether the part is compatible with the existing rail architecture. |
| Package | TSSOP-20 | TSSOP-16 | Package and pin count affect PCB footprint and layout; different packages are not footprint-compatible. |
| Typical Application | Precision industrial measurement / sensor digitization | Motor control / current sensing | The target application indicates the intended signal chain and helps assess functional substitutability. |
| Data Rate / Bandwidth Class | Low-speed, high-resolution conversion | Modulator output suitable for high-speed current-loop control | Conversion speed versus resolution trade-off determines suitability for precision measurement versus fast control loops. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS1259IPWR | ADS1208IPWR |
|---|---|---|
| Supplier | - | Texas Instruments,Rochester Electronics, LLC |
| Part Status | Active | Obsolete |
| Type | - | Modulator |
| Number of Channels | - | 1 |
| Resolution(Bits) | - | 16 b |
| Sampling Rate(Per Second) | 14k | 40k |
| Data Interface | SPI | Serial |
| Voltage Supply Source | - | Analog and Digital |
| Voltage - Supply | - | 2.7V ~ 5.5V, 4.5V ~ 5.5V |
| Operating Temperature | -40°C ~ 105°C | -40°C ~ 85°C |
| Mounting Type | - | Surface Mount |
| Number of Bits | 24 | - |
| Number of Inputs | 1 | - |
| Input Type | Differential, Single Ended | - |
| Configuration | ADC | - |
| Number of A/D Converters | 1 | - |
| Architecture | Sigma-Delta | - |
| Reference Type | External | - |
| Voltage - Supply, Analog | 5V | - |
| Voltage - Supply, Digital | 2.7V ~ 5.25V | - |
| Features | PGA | - |
The ADS1259IPWR is a 24-bit, 14.4-kSPS delta-sigma analog-to-digital converter with an integrated low-noise programmable gain amplifier, while the ADS1208IPWR is a 16-bit, 10-MHz delta-sigma modulator intended for isolated current sensing and motor control applications. The ADS1259 integrates a full ADC signal chain, whereas the ADS1208 outputs a modulated bitstream requiring external digital filtering.
No. The ADS1259IPWR is supplied in a 20-pin TSSOP (PW) package, and the ADS1208IPWR is supplied in a 16-pin TSSOP (PW) package. The pin counts and pin functions differ, so they are not pin-to-pin compatible and cannot be interchanged on the same PCB land pattern.
The ADS1259IPWR provides 24-bit resolution with programmable data rates up to 14.4 kSPS. The ADS1208IPWR provides 16-bit resolution as a delta-sigma modulator with a clock input up to 10 MHz, producing a 1-bit modulated output stream that is decimated externally to achieve the effective 16-bit result.
The ADS1208IPWR is designed specifically for isolated current sensing, such as shunt-based motor drive and power monitoring, because its modulator output can be passed through a digital isolator. The ADS1259IPWR is a complete ADC with an SPI interface and is intended for direct precision measurement rather than isolated modulator-based signal chains.
The ADS1259IPWR provides an SPI-compatible serial interface for configuration and data readout. The ADS1208IPWR provides a single-bit delta-sigma modulator output (DATA and CLK), which requires an external digital filter or microcontroller decimation stage rather than a standard register-based serial protocol.
They have different supply requirements. The ADS1259IPWR uses an analog supply (AVDD) of 5 V and a digital supply (DVDD) of 2.7 V to 5 V. The ADS1208IPWR operates from a single 5 V supply. Designers must verify exact supply rails against the respective manufacturer datasheets before considering any common-supply design.
No. Because they differ in resolution, output format, package pin count, interface type, and intended application, the ADS1259IPWR and ADS1208IPWR are not direct substitutes. Any replacement would require redesign of the PCB land pattern, digital interface, filtering, and signal-chain architecture, validated against the manufacturer datasheets.