ADS8568SPM vs ADS8548SPMR

Bảng so sánh chi tiết giữa ADS8568SPM và ADS8548SPMR cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The ADS8548SPMR is a strong functional replacement candidate for the ADS8568SPM, sharing the same 16-bit SAR architecture, 8-channel simultaneous-sampling configuration, and TQFP-64 footprint. The primary distinction is the parallel interface on the ADS8568SPM versus the serial interface on the ADS8548SPMR, which requires host-side interface redesign but does not affect core conversion performance.

Resolution and Architecture High match
Channel Count and Sampling High match
Package and Footprint High match
Host Interface Type Validation required

Parts at a glance

Part A

ADS8568SPM

Texas Dụng cụ

Lifecycle
Active
Stock
3952 PCS
Package
LQFP-64
Series
Data Acquisition - Analog to Digital Converters (ADC)
Part B

ADS8548SPMR

Bán dẫn quốc gia

Lifecycle
Active
Stock
6339 PCS
Package
LQFP-64
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS8568SPM ADS8548SPMR Why it matters
Resolution 16 bit 14 bit Resolution determines the smallest measurable signal change; a 16-bit ADC provides finer quantization than a 14-bit device, affecting accuracy and dynamic range.
Number of Input Channels 8 8 Channel count defines how many analog signals can be sampled; both devices offer 8 channels, so channel capacity is not a differentiator.
Sampling Rate 500 kSPS 500 kSPS Maximum sampling rate limits the bandwidth of signals that can be digitized; identical rates mean comparable throughput for both parts.
Input Type Single-ended Single-ended Input configuration affects signal conditioning and noise immunity; both being single-ended means similar front-end design requirements.
Supply Voltage 5 V (analog), 3.3 V (digital) 5 V (analog), 3.3 V (digital) Supply requirements determine power rail compatibility; matching voltages allow the same power design to be reused.
Interface SPI SPI The digital interface must match the host controller; both using SPI ensures drop-in compatibility for the communication bus.
Package LQFP-64 LQFP-64 Package footprint affects PCB layout and assembly; identical packages allow the same board design to be used.
Operating Temperature Range -40°C to +125°C -40°C to +125°C Temperature range determines suitability for harsh environments; matching ranges mean equivalent environmental robustness.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS8568SPM ADS8548SPMR
Supplier - Rochester Electronics, LLC
Part Status Active Active
Number of Bits 16 14
Sampling Rate(Per Second) 500k 600k
Number of Inputs 8 8
Input Type Single Ended Single Ended
Data Interface SPI, Parallel SPI, Parallel
Configuration S/H-ADC S/H-ADC
Ratio - S / H: ADC 1:1 1:1
Number of A/D Converters 1 1
Architecture SAR SAR
Reference Type External, Internal External, Internal
Voltage - Supply, Analog 5V 5V
Voltage - Supply, Digital 2.7V ~ 5.5V 2.7V ~ 5.5V
Features Simultaneous Sampling Simultaneous Sampling
Operating Temperature -40°C ~ 125°C -40°C ~ 125°C

Frequently asked questions

What are the key differences between the ADS8568SPM and ADS8548SPMR?

The ADS8568SPM is an 8-channel, 16-bit simultaneous-sampling SAR ADC, while the ADS8548SPMR is an 8-channel, 14-bit simultaneous-sampling SAR ADC. Both share the same 64-pin LQFP package and similar architecture, but the ADS8568 provides 16-bit resolution versus 14-bit on the ADS8548, and the "R" suffix on the ADS8548SPMR denotes tape-and-reel packaging.

Are the ADS8568SPM and ADS8548SPMR pin-compatible?

Yes. Both devices are offered in the same 64-pin LQFP (PM) package with the same pinout, allowing a common PCB footprint. However, resolution, performance specifications, and ordering suffix differ, so firmware and accuracy requirements must be validated before substitution.

What is the maximum sampling rate of these ADCs?

Both the ADS8568 and ADS8548 support a maximum throughput of 500 kSPS per channel with all eight channels sampling simultaneously, as specified in the Texas Instruments datasheets.

What analog input voltage range do the ADS8568SPM and ADS8548SPMR support?

Both devices support bipolar analog input ranges of ±10 V, ±5 V, and ±2.5 V, as well as a unipolar 0 V to 5 V range, configured via the internal reference and input range settings described in the datasheet.

Do these ADCs include an internal voltage reference?

Yes. Both the ADS8568 and ADS8548 integrate an internal reference with a buffered output, and they also support the use of an external reference if higher accuracy or a different reference value is required.

What digital interface do the ADS8568SPM and ADS8548SPMR use?

Both devices provide a parallel interface (byte/word mode) as well as a serial interface compatible with SPI, allowing flexible connection to FPGAs, DSPs, and microcontrollers.

What are the typical applications for these simultaneous-sampling ADCs?

These devices are intended for applications requiring simultaneous multi-channel acquisition, such as power quality monitoring, motor control, protective relays, and industrial data acquisition systems, where phase-coherent sampling across eight channels is essential.

How do the power supply requirements compare between the two parts?

Both devices operate from an analog supply of 5 V and a digital supply of 2.7 V to 5.5 V, with the same power dissipation class per the respective datasheets. The primary difference remains resolution (16-bit vs 14-bit) rather than supply architecture.