AFE58JD28ZAV
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 7063 PCS
- Package
- NFBGA-289
- Series
- Data Acquisition - Analog Front End (AFE)
Bảng so sánh chi tiết giữa AFE58JD28ZAV và AFE5804ZCF cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The AFE58JD28ZAV and AFE5804ZCF are not drop-in replacements for one another. The AFE58JD28ZAV is a 16-channel ultrasound analog front end with integrated JESD204B serial output, digital demodulation, and CW Doppler processing, while the AFE5804ZCF is an 8-channel device with LVDS serial output and a different package and channel count. Designers must account for differences in channel count, digital interface, package footprint, and functional feature set before considering substitution.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AFE58JD28ZAV | AFE5804ZCF | Why it matters |
|---|---|---|---|
| Number of Channels | 16 | 8 | Channel count determines how many transducer elements can be processed simultaneously, directly affecting imaging system architecture and channel-count compatibility. |
| ADC Resolution | 14 bit | 12 bit | Higher ADC resolution provides greater dynamic range and finer signal quantization, which impacts image quality and small-signal detection. |
| Maximum Sampling Rate | 65 MSPS | 40 MSPS | Sampling rate limits the maximum signal bandwidth and achievable axial resolution, so a lower-rate device may not support the same imaging modes. |
| Input Clock Frequency | Up to 65 MHz | Up to 40 MHz | The clock frequency bounds the ADC conversion rate and must match the system timing to achieve the intended sample rate. |
| Output Interface | JESD204B serial (LVDS) | LVDS serial | The digital output interface must be compatible with the downstream FPGA or receiver; JESD204B and LVDS are not directly interchangeable without rework. |
| Package | NFBGA (ZAV) | NFBGA (ZCF) | Package footprint and pinout determine PCB layout compatibility; differing packages generally require a board redesign for substitution. |
| Supply Voltage | 1.8 V / 3.3 V (multiple rails) | 1.8 V / 3.3 V (multiple rails) | Supply rail requirements affect power delivery design; similar rails ease substitution but exact sequencing and tolerances must still be verified. |
| Integrated CW Doppler / Demodulation | Yes (digital demodulation and CW support) | Yes (CW Doppler support) | Continuous-wave Doppler capability is essential for blood-flow measurement; differences in demodulation architecture affect system-level Doppler processing. |
| Typical Application | High-channel-count ultrasound systems | Mid-range ultrasound systems | The intended application class indicates the performance tier and helps assess whether the device meets the target system's imaging requirements. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AFE58JD28ZAV | AFE5804ZCF |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 12, 14 | 12 |
| Number of Channels | 16 | 8 |
| Power (Watts) | 64 mW | 101 mW |
| Voltage - Supply, Analog | 3.15V ~ 3.6V | 3.15V ~ 3.47V, 5V |
| Voltage - Supply, Digital | - | 1.7V ~ 1.9V |
| Mounting Type | Surface Mount | Surface Mount |
The AFE58JD28ZAV is an 8-channel ultrasound analog front end (AFE) with a 14-bit ADC, JESD204B serial output, and integrated digital demodulation, while the AFE5804ZCF is an 8-channel AFE with a 12-bit ADC and LVDS parallel output. The AFE58JD28ZAV targets higher-channel-count, high-speed digital ultrasound systems, whereas the AFE5804ZCF suits legacy LVDS-based architectures.
No. The AFE58JD28ZAV is supplied in a 289-ball NFBGA package, and the AFE5804ZCF is supplied in a 100-pin TQFP package. The package types, pin counts, and pin functions differ, so they are not drop-in replacements and require separate PCB layouts.
The AFE58JD28ZAV integrates a 14-bit ADC with a JESD204B serial output interface. The AFE5804ZCF integrates a 12-bit ADC with an LVDS output interface. The higher resolution and serialized JESD204B output of the AFE58JD28ZAV reduce FPGA I/O count in dense systems.
Yes. Both the AFE58JD28ZAV and AFE5804ZCF are 8-channel ultrasound AFEs, each integrating eight receive channels with low-noise amplifiers, variable-gain amplifiers, and anti-aliasing filters ahead of the ADC.
The AFE58JD28ZAV is generally preferred for new high-channel-count designs because its JESD204B serial output reduces FPGA pin count and routing complexity compared with the LVDS parallel output of the AFE5804ZCF. The 14-bit ADC also provides higher dynamic range. Selection should still be validated against the system's power, clocking, and FPGA interface requirements.
No. Because the packages, pin counts, ADC resolution, and output interfaces differ, the AFE5804ZCF cannot directly replace the AFE58JD28ZAV. A redesign of the PCB, FPGA interface, and clocking scheme would be required, and the change must be validated against the manufacturer datasheets.
Both devices require analog and digital supply rails and external clocking, but the AFE58JD28ZAV adds JESD204B serial link requirements, including a compatible FPGA transceiver and reference clock, while the AFE5804ZCF requires LVDS receiver pins on the FPGA. Power consumption, channel density, and FPGA I/O budget should be compared using the respective manufacturer datasheets before selection.