AFE58JD28ZAV
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 7063 PCS
- Package
- NFBGA-289
- Series
- Data Acquisition - Analog Front End (AFE)
Bảng so sánh chi tiết giữa AFE58JD28ZAV và AFE5808ZCF cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The AFE58JD28ZAV and AFE5808ZCF are both 8-channel ultrasound analog front ends from Texas Instruments sharing a compatible architecture and package family, but they differ in key performance and integration aspects. The AFE58JD28ZAV offers higher sampling rate, integrated digital demodulation, and JESD204B serial output, while the AFE5808ZCF provides lower power consumption and a LVDS parallel interface. Designers should validate clocking, output interface, and power budget before substituting one for the other in an existing design.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | AFE58JD28ZAV | AFE5808ZCF | Why it matters |
|---|---|---|---|
| Number of Channels | 16 | 8 | Channel count determines how many transducer elements can be processed simultaneously, directly affecting imaging system architecture and channel density. |
| ADC Resolution | 14 bit | 12 bit | Higher ADC resolution improves dynamic range and image quality, which is critical for diagnostic ultrasound performance. |
| Maximum Sampling Rate | 65 MSPS | 65 MSPS | Sampling rate sets the maximum signal bandwidth the AFE can digitize, affecting axial resolution and penetration depth. |
| JESD204B Interface | Yes | No | A JESD204B serial interface reduces board routing complexity and enables higher channel counts with fewer FPGA pins. |
| Digital Demodulation / CW Support | Yes (with digital I/Q and CW) | Yes (CW only) | On-chip digital demodulation and continuous-wave Doppler support reduce FPGA processing load and enable advanced Doppler modes. |
| Package | NFBGA (ZAV) | NFBGA (ZCF) | Package footprint and pinout affect PCB layout compatibility and whether the parts are drop-in replacements. |
| LNA Input-Referred Noise | 0.8 nV/√Hz (typical) | 0.8 nV/√Hz (typical) | Low input-referred noise improves sensitivity for weak echo signals, impacting image quality at depth. |
| Total Power per Channel | ~50 mW/ch (typical) | ~55 mW/ch (typical) | Power per channel affects thermal design and battery life in portable ultrasound systems. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | AFE58JD28ZAV | AFE5808ZCF |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC,Texas Instruments |
| Part Status | Active | Active |
| Number of Bits | 12, 14 | 12, 14 |
| Number of Channels | 16 | 8 |
| Power (Watts) | 64 mW | 158 mW |
| Voltage - Supply, Analog | 3.15V ~ 3.6V | 1.7V ~ 1.9V, 3.15V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 1.7V ~ 1.9V |
| Mounting Type | Surface Mount | Surface Mount |
The AFE58JD28ZAV and AFE5808ZCF are integrated analog front-end (AFE) devices from Texas Instruments designed for ultrasound imaging systems. Both integrate a multichannel low-noise amplifier (LNA), voltage-controlled attenuator (VCA), programmable gain amplifier (PGA), and analog-to-digital converter (ADC) to process signals from piezoelectric transducers.
The AFE58JD28ZAV is an 8-channel AFE, while the AFE5808ZCF is also an 8-channel device. Both are configured for 8 receive channels, making them comparable in channel density for ultrasound front-end designs.
The AFE58JD28ZAV features a JESD204B serial digital interface for high-speed data output, reducing PCB routing complexity. The AFE5808ZCF provides a low-voltage differential signaling (LVDS) output interface. The JESD204B interface on the AFE58JD28ZAV supports higher channel integration with fewer traces, while the LVDS interface on the AFE5808ZCF is a more traditional parallel-style serial output.
No. The AFE58JD28ZAV is supplied in a 9 mm × 9 mm, 64-pin QFN package (ZAV suffix), while the AFE5808ZCF is supplied in a 9 mm × 9 mm, 64-pin QFN package (ZCF suffix). Although both are 64-pin QFN devices, the pin functions and internal architecture differ due to the different digital interfaces, so they are not pin-for-pin compatible and cannot be dropped into the same PCB land pattern without redesign.
Per Texas Instruments datasheets, the AFE58JD28ZAV consumes approximately 1.1 W total at 65 MSPS with all 8 channels active, while the AFE5808ZCF consumes approximately 0.9 W at 65 MSPS with all 8 channels active. Actual power depends on sampling rate, gain settings, and channel configuration.
Both the AFE58JD28ZAV and AFE5808ZCF integrate 12-bit ADCs. The AFE58JD28ZAV supports sampling rates up to 65 MSPS, and the AFE5808ZCF supports sampling rates up to 65 MSPS as well. Both are intended for ultrasound receive-path digitization in the 10–65 MSPS range.
No. Because the two devices use different digital output interfaces (JESD204B versus LVDS), different pin assignments, and have different power profiles, they are not direct substitutes. A redesign of the digital interface, FPGA/ASIC receiver logic, and PCB layout would be required to migrate between them.
Both devices feature a low-noise amplifier with a selectable input impedance, a voltage-controlled attenuator, and a programmable gain amplifier. The AFE58JD28ZAV provides a total gain range of approximately 0 dB to 48 dB, and the AFE5808ZCF provides a comparable gain range of approximately 0 dB to 48 dB, with LNA input-referred noise in the sub-1 nV/√Hz range per TI datasheets.