AM26LS32ACDR vs AM26LS31CDG4

Bảng so sánh chi tiết giữa AM26LS32ACDR và AM26LS31CDG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The AM26LS32ACDR and AM26LS31CDG4 are not functionally interchangeable despite sharing the same RS-422/RS-485 family and SOIC-16 footprint. The AM26LS32ACDR is a quad differential line receiver, while the AM26LS31CDG4 is a quad differential line driver, so their signal direction, I/O architecture, and application roles are fundamentally different. Substitution is not possible without redesigning the interface around the opposite function.

Different device function Receiver vs driver Different I/O direction Different application role

Parts at a glance

Part A

AM26LS32ACDR

Texas Dụng cụ

Lifecycle
Active
Stock
2449 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers
Part B

AM26LS31CDG4

Texas Dụng cụ

Lifecycle
Active
Stock
8504 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26LS32ACDR AM26LS31CDG4 Why it matters
Function Quadruple differential line receiver Quadruple differential line driver Receiver and driver are complementary but not interchangeable; a receiver cannot transmit and a driver cannot receive, so they serve opposite ends of a differential link.
Number of Drivers 0 4 The driver count determines how many differential output channels are available to transmit signals onto a bus.
Number of Receivers 4 0 The receiver count determines how many differential input channels can be monitored from a bus.
Output Type 3-state (tri-state) outputs 3-state (tri-state) outputs Tri-state outputs allow devices to be disconnected from a shared bus, enabling multi-drop configurations without contention.
Supply Voltage (Vcc) 5 V (4.75 V to 5.25 V) 5 V (4.75 V to 5.25 V) Both require a nominal 5 V supply, so the same power rail can be used, but the function still differs.
Package / Mounting SOIC-16, surface mount SOIC-16, surface mount Identical package and footprint allow either part to be placed on the same board location, though the circuit role differs.
Operating Temperature Range 0°C to 70°C 0°C to 70°C Commercial temperature range suitability is the same for both, so environmental constraints do not distinguish them.
Standard Compliance Meets TIA/EIA-422-B and TIA/EIA-423-B (RS-422/RS-423) Meets TIA/EIA-422-B and TIA/EIA-423-B (RS-422/RS-423) Both comply with the same differential signaling standards, so they can be paired in a compliant RS-422/RS-423 link.
Input/Output Logic Differential inputs, TTL-compatible outputs TTL-compatible inputs, differential outputs The signal direction is opposite: the receiver converts differential to single-ended, while the driver converts single-ended to differential.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26LS32ACDR AM26LS31CDG4
Supplier - Rochester Electronics, LLC,Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Receiver Driver
Protocol RS422, RS423 RS422, RS485
Number of Drivers/Receivers 0/4 4/0
Voltage - Supply 4.75V ~ 5.25V 4.75V ~ 5.25V
Operating Temperature 0°C ~ 70°C 0°C ~ 70°C
Mounting Type Surface Mount Surface Mount
Receiver Hysteresis 50 mV -

Frequently asked questions

What are the primary functional differences between the AM26LS32ACDR and the AM26LS31CDG4?

The AM26LS32ACDR is a quad differential line receiver, while the AM26LS31CDG4 is a quad differential line driver. The AM26LS32ACDR is designed to receive balanced differential signals and convert them to TTL-compatible outputs, whereas the AM26LS31CDG4 is designed to transmit TTL-level signals as balanced differential outputs compliant with RS-422 and RS-485 signaling standards.

Are the AM26LS32ACDR and AM26LS31CDG4 pin-compatible and can they be used as drop-in replacements for each other?

No. Although both devices are offered in a 16-pin SOIC package (D suffix), they are not functionally interchangeable. The AM26LS32ACDR is a receiver with input pins and tri-state outputs, while the AM26LS31CDG4 is a driver with TTL inputs and differential outputs. Pin functions and internal circuitry differ, so one cannot directly replace the other in a circuit without redesign.

What are the supported signaling standards and data rates for each device?

The AM26LS32ACDR receiver is designed for balanced differential data transmission and is compatible with RS-422, RS-423, and RS-485 signaling. The AM26LS31CDG4 driver is specified for RS-422 and RS-485 balanced differential transmission. Both devices are commonly used in serial data communication applications, and their maximum data rate depends on the external termination and cable characteristics as specified in the respective manufacturer datasheets.

What are the supply voltage and operating temperature ranges for the AM26LS32ACDR and AM26LS31CDG4?

Both devices operate from a single 5 V nominal supply. The AM26LS32ACDR is specified over the commercial temperature range of 0°C to 70°C. The AM26LS31CDG4 is also specified over the commercial temperature range of 0°C to 70°C. Designers should consult the respective manufacturer datasheets for exact recommended operating conditions and absolute maximum ratings.

Can the AM26LS32ACDR and AM26LS31CDG4 be used together in a single communication link?

Yes. Because one is a driver and the other is a receiver, they are complementary devices. The AM26LS31CDG4 can transmit differential signals over a balanced twisted-pair cable, and the AM26LS32ACDR can receive those signals at the other end of the link. This driver/receiver pairing is a common configuration in RS-422 and RS-485 communication systems.

What package options are available for the AM26LS32ACDR and AM26LS31CDG4?

The AM26LS32ACDR is supplied in a 16-pin SOIC package (D suffix, tape and reel). The AM26LS31CDG4 is supplied in a 16-pin SOIC package (D suffix, tube or rail packaging per the DG4 ordering code). Both are surface-mount SOIC-16 packages, but the ordering suffixes indicate different packaging and temperature grade conventions from the manufacturer.

Do the AM26LS32ACDR and AM26LS31CDG4 include fail-safe or tri-state features?

The AM26LS32ACDR receiver includes a tri-state output enable function, allowing the outputs to be placed in a high-impedance state for bus sharing. The AM26LS31CDG4 driver includes an output enable function that places the differential outputs in a high-impedance state when disabled. Designers should verify the exact enable logic polarity and fail-safe behavior in the manufacturer datasheet for each device.