AM26LS32ACDR vs AM26LS32AIDE4

Bảng so sánh chi tiết giữa AM26LS32ACDR và AM26LS32AIDE4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26LS32ACDR and AM26LS32AIDE4 are functionally equivalent quad differential line receivers sharing the same core architecture, logic family, and electrical characteristics, making them viable substitutes in most designs. The primary distinction lies in package and qualification grade, so the AM26LS32AIDE4 serves as a suitable replacement for the AM26LS32ACDR where the enhanced temperature and reliability specifications are acceptable, provided the package footprint is compatible with the target board layout.

Function and Logic Family High match
Electrical Characteristics High match
Package Type Validation required
Operating Temperature Range Validation required

Parts at a glance

Part A

AM26LS32ACDR

Texas Dụng cụ

Lifecycle
Active
Stock
2449 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers
Part B

AM26LS32AIDE4

Texas Dụng cụ

Lifecycle
Active
Stock
8173 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26LS32ACDR AM26LS32AIDE4 Why it matters
Function Quadruple differential line receiver Quadruple differential line receiver Both devices perform the same core function, so they are functionally interchangeable in receiver applications.
Number of Receivers 4 4 Matching receiver count ensures the same number of differential channels can be handled in the target design.
Supply Voltage (VCC) 5 V (4.75 V to 5.25 V) 5 V (4.75 V to 5.25 V) Identical supply requirements allow the parts to be used in the same power rail configuration without redesign.
Receiver Input Type Differential (RS-422/RS-423 compatible) Differential (RS-422/RS-423 compatible) Same input compatibility ensures both parts interface with the same differential signaling standards.
Output Type 3-state (tri-state) outputs 3-state (tri-state) outputs Tri-state outputs allow bus sharing; matching this behavior preserves bus arbitration and multiplexing designs.
Operating Temperature Range 0°C to 70°C -40°C to 85°C The wider industrial temperature range of the AIDE4 variant matters for harsh-environment or industrial applications.
Package / Mounting SOIC-16, surface mount SOIC-16, surface mount Package and mounting must match the PCB footprint; both use SOIC-16, so board layout is compatible.
Qualification / Grade Commercial grade Industrial grade Grade differences affect environmental robustness and suitability for industrial versus commercial deployments.
RoHS Compliance RoHS compliant RoHS compliant Both meet RoHS, so environmental compliance requirements are satisfied by either part.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26LS32ACDR AM26LS32AIDE4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Type Receiver Receiver
Protocol RS422, RS423 RS422, RS423
Number of Drivers/Receivers 0/4 0/4
Receiver Hysteresis 50 mV 50 mV
Voltage - Supply 4.75V ~ 5.25V 4.75V ~ 5.25V
Operating Temperature 0°C ~ 70°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the AM26LS32ACDR and AM26LS32AIDE4?

Both are quad differential line receivers from Texas Instruments that meet the requirements of TIA/EIA-422-B and TIA/EIA-423-B, as well as ITU Recommendation V.10 and V.11. They are designed to receive balanced or unbalanced digital data over twisted-pair or parallel-wire lines.

What is the main difference between the AM26LS32ACDR and AM26LS32AIDE4?

The primary difference is the package and ordering designation. The AM26LS32ACDR is supplied in a 16-pin SOIC package (D suffix) on a large tape-and-reel (R suffix), while the AM26LS32AIDE4 is supplied in a 16-pin SOIC package (D suffix) in a tube (E4 suffix). Both use the same die and electrical specifications.

Are the AM26LS32ACDR and AM26LS32AIDE4 electrically identical?

Yes. Both devices share the same datasheet and electrical characteristics, including input sensitivity of ±200 mV, common-mode voltage range of ±7 V, and a typical propagation delay of 17 ns. The only differences are packaging and shipping format.

What is the operating temperature range for these devices?

Both the AM26LS32ACDR and AM26LS32AIDE4 are specified for operation over the industrial temperature range of –40°C to 85°C, as stated in the Texas Instruments datasheet.

Can the AM26LS32ACDR and AM26LS32AIDE4 be used interchangeably in a design?

Yes, from an electrical and footprint perspective they are interchangeable because both are 16-pin SOIC devices with identical pinouts. The choice between them depends on the assembly method: the CDR is intended for automated reel-fed pick-and-place, while the IDE4 is supplied in tubes for manual or low-volume assembly.

What are the supply voltage and power requirements for these receivers?

Both devices operate from a single 5 V supply (nominal), with a specified supply voltage range of 4.75 V to 5.25 V. Typical supply current is 70 mA, per the Texas Instruments datasheet.

Do these devices include fail-safe or open-input detection?

The AM26LS32A family does not include a fail-safe feature that forces a defined output when inputs are open or terminated. Designers should provide external biasing if a defined output state is required under open-line conditions.

What output type do the AM26LS32ACDR and AM26LS32AIDE4 provide?

Both devices provide 3-state (tri-state) outputs, allowing them to be connected to a common bus. The output enable function is controlled via the enable pins, as specified in the Texas Instruments datasheet.