74HCT00D vs 74HCT04D

Bảng so sánh chi tiết giữa 74HCT00D và 74HCT04D cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The 74HCT04D and 74HCT00D are not functionally interchangeable despite sharing the same 74HCT logic family, SOIC-14 package, and supply voltage range. The 74HCT04D provides six independent inverters, while the 74HCT00D contains four 2-input NAND gates, resulting in fundamentally different logic functions, pin assignments, and gate counts. Direct substitution is not possible without circuit redesign.

Different logic function Different gate count Different pin assignment Different input configuration

Parts at a glance

Part A

74HCT00D

Toshiba Semiconductor và lưu trữ

Lifecycle
Active
Stock
1289 PCS
Package
SOIC-20
Series
Logic - Gates and Inverters
Part B

74HCT04D

Toshiba Semiconductor và lưu trữ

Lifecycle
Active
Stock
4496 PCS
Package
SOIC-16
Series
Logic - Gates and Inverters

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter 74HCT04D 74HCT00D Why it matters
Logic Function Hex Inverter Quad 2-Input NAND Gate Defines the fundamental logic operation performed; these devices are not functionally interchangeable.
Number of Gates 6 4 Determines how many independent logic operations can be performed in a single package.
Number of Inputs per Gate 1 2 Affects the logic capability and the number of signal connections required per gate.
Supply Voltage Range 4.5 V to 5.5 V 4.5 V to 5.5 V Both parts operate in the standard 5 V TTL-compatible range, allowing use in the same supply environment.
Logic Family HCT HCT HCT devices provide TTL-compatible input thresholds while using CMOS technology, ensuring similar interface behavior.
Output Drive Current (IOH/IOL) ±4 mA ±4 mA Determines the fan-out and ability to drive connected loads; matching values support similar loading conditions.
Propagation Delay (tpd) Typical 12 ns at 5 V Typical 12 ns at 5 V Affects maximum operating speed and timing margins in synchronous designs.
Package SO14 SO14 Identical package and pin count simplify PCB footprint and assembly compatibility.
Operating Temperature Range -40 °C to +125 °C -40 °C to +125 °C Ensures both devices can be used in the same industrial and automotive temperature environments.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification 74HCT00D 74HCT04D
Series 74HCT 74HCT
Part Status Obsolete Active
Logic Type NAND Gate Inverter
Number of Circuits 4 6
Number of Inputs 2 1
Voltage - Supply 4.5V ~ 5.5V 4.5V ~ 5.5V
Current - Quiescent (Max) 1 µA 1 µA
Current - Output High Low 4mA, 4mA 4mA, 4mA
Logic Level - Low 0.8V 0.8V
Logic Level - High 2V 2V
Max Propagation Delay @ V Max CL 17ns @ 5.5V, 50pF 16ns @ 5.5V, 50pF
Operating Temperature -40°C ~ 85°C -40°C ~ 125°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary functional differences between the 74HCT04D and 74HCT00D?

The 74HCT04D is a hex inverter, containing six independent NOT gates that output the logical inverse of each input. The 74HCT00D is a quad 2-input NAND gate, containing four independent gates that output a LOW signal only when both inputs are HIGH. They perform different logic functions and are not functionally interchangeable.

Are the 74HCT04D and 74HCT00D pin-compatible in the SO14 package?

No. Although both devices are commonly offered in a 14-pin SOIC package (D suffix), their pinouts differ. The 74HCT04D follows the standard hex inverter pinout with inputs on pins 1, 3, 5, 9, 11, and 13 and outputs on pins 2, 4, 6, 8, 10, and 12, with power on pins 14 and 7. The 74HCT00D uses a different arrangement for its four 2-input NAND gates. A direct PCB drop-in replacement is not possible without layout changes.

Do both the 74HCT04D and 74HCT00D operate on the same supply voltage range?

Yes. Both are HCT-family CMOS devices specified for a nominal 5 V supply, with a recommended operating supply voltage range of 4.5 V to 5.5 V. They are designed to interface TTL-level inputs with CMOS outputs at 5 V.

Can the 74HCT04D be used to replace a 74HCT00D in an existing design?

No, not directly. Because the logic function and pinout differ, substituting one for the other would require redesigning the circuit to account for the different gate functions and pin assignments. The 74HCT04D inverts a single input per gate, while the 74HCT00D performs a 2-input NAND operation.

What are the typical propagation delay characteristics of these devices?

Both the 74HCT04D and 74HCT00D are specified with typical propagation delays in the range of approximately 8 ns to 20 ns at 5 V, depending on the specific manufacturer and load conditions. For exact values, the respective manufacturer datasheets should be consulted, as parameters can vary slightly between suppliers.

Are the 74HCT04D and 74HCT00D available in identical package options?

Both devices are commonly available in the SO14 (D) surface-mount package, as indicated by the "D" suffix. They may also be offered in other packages such as TSSOP or DIP by various manufacturers, but the specific package options depend on the supplier. Designers should verify package availability with the chosen manufacturer or distributor.

Do both devices have the same input and output drive capabilities?

Yes. As members of the 74HCT family, both the 74HCT04D and 74HCT00D typically feature standard CMOS outputs capable of driving similar loads, with symmetric source and sink currents usually specified in the range of ±4 mA to ±6 mA at 5 V. Exact drive strength should be confirmed from the manufacturer datasheet for the specific part number.