ADS7843E/2K5
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 2859 PCS
- Package
- SSOP-16
- Series
- Data Acquisition - Touch Screen Controllers
Bảng so sánh chi tiết giữa ADS7843E/2K5 và ADS7841EG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS7843E/2K5 and ADS7841EG4 are not drop-in replacements for one another. Although both are 12-bit touch-screen controller ADCs from Texas Instruments in a 16-pin SSOP package, they differ in resolution architecture, interface protocol, channel configuration, and supply voltage range, so the ADS7841EG4 cannot be substituted directly for the ADS7843E/2K5 without circuit and firmware redesign.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E/2K5 | ADS7841EG4 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 12 | 12 | Both are 12-bit SAR ADCs, so conversion resolution is equivalent for touch or signal digitization. |
| Number of input channels | 4 (single-ended/differential touch configuration) | 4 (single-ended) | Channel configuration affects whether the device can directly interface with a 4-wire resistive touchscreen versus general single-ended analog inputs. |
| Interface type | SPI-compatible serial (12-bit) | SPI-compatible serial | Serial interface compatibility determines ease of connection to microcontrollers and system bus architecture. |
| Supply voltage range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Matching supply ranges allow either part to operate in the same low-voltage or 5 V system rails. |
| Internal reference | Yes (internal 2.5 V reference) | Yes (internal 2.5 V reference) | An internal reference simplifies design by removing the need for an external precision voltage reference. |
| Package type | TSSOP-16 | TSSOP-16 | Identical package and pin count support drop-in PCB compatibility between the two parts. |
| Operating temperature range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent temperature ratings ensure both parts suit the same industrial and commercial environments. |
| Typical application focus | Resistive touchscreen controller | General-purpose 12-bit ADC | The ADS7843 is optimized for touchscreen digitizing (with pen-interrupt and touch detection), while the ADS7841 is a general-purpose ADC, affecting functional substitutability. |
| Throughput / conversion rate | Up to 125 kSPS | Up to 200 kSPS | Higher throughput in the ADS7841 allows faster sampling, which may matter for higher-speed signal acquisition needs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E/2K5 | ADS7841EG4 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Discontinued at Digi-Key |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
| Touchscreen | 4 Wire Resistive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 2.5 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E/2K5 is a 4-wire resistive touch screen controller with an integrated 12-bit ADC, while the ADS7841EG4 is a standalone 12-bit, 4-channel successive-approximation ADC. The ADS7843E/2K5 includes on-chip touch screen drivers and a pen-interrupt output, whereas the ADS7841EG4 provides a general-purpose 4-channel analog input multiplexer without touch screen control logic.
No. The ADS7843E/2K5 is supplied in a 16-pin SSOP package, and the ADS7841EG4 is supplied in a 16-pin SOIC (wide-body) package. The package types and pin functions differ, so they are not drop-in replacements for each other.
Both devices use a serial interface, but the protocols differ. The ADS7843E/2K5 uses a 3-wire SPI-compatible interface with a dedicated BUSY output and pen-interrupt signal. The ADS7841EG4 uses a standard 4-wire SPI-compatible interface (CS, DIN, DOUT, DCLK) without touch screen control signals.
Both devices provide 12-bit resolution. The ADS7843E/2K5 supports a throughput rate up to 125 kSPS. The ADS7841EG4 supports a throughput rate up to 200 kSPS. These figures should be confirmed against the respective manufacturer datasheets for the exact grade and test conditions.
No. The ADS7841EG4 lacks the integrated touch screen drivers, pen-interrupt output, and touch-specific control logic present in the ADS7843E/2K5. A touch screen design requiring those features cannot use the ADS7841EG4 as a direct substitute without additional external circuitry and firmware changes.
The ADS7843E/2K5 operates from a single supply of 2.7 V to 5.25 V. The ADS7841EG4 operates from a single supply of 2.7 V to 5.25 V. Both devices support low-voltage operation, but the analog input range and reference configuration should be verified per datasheet for each part.
The ADS7841EG4 is better suited for general-purpose 4-channel analog signal acquisition because it provides a standard 4-channel input multiplexer and a 200 kSPS throughput rate without touch screen-specific overhead. The ADS7843E/2K5 is optimized specifically for 4-wire resistive touch screen digitizing applications.