ADS7843E/2K5
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 2859 PCS
- Package
- SSOP-16
- Series
- Data Acquisition - Touch Screen Controllers
Bảng so sánh chi tiết giữa ADS7843E/2K5 và ADS7841ES/2K5 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS7843E/2K5 and ADS7841ES/2K5 are not functionally interchangeable despite sharing the same SSOP-16 package and 12-bit SAR architecture. The ADS7843E/2K5 integrates a 4-wire resistive touch screen controller with an on-chip switch driver and pen-interrupt output, whereas the ADS7841ES/2K5 is a general-purpose 4-channel ADC without touch screen control logic. Their interface timing, input configuration, and application intent differ fundamentally, so substitution requires redesign rather than direct replacement.
Texas Dụng cụ
Texas Dụng cụ
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E/2K5 | ADS7841ES/2K5 | Why it matters |
|---|---|---|---|
| Resolution (bits) | 12 | 12 | Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability. |
| Number of input channels | 4 (single-ended) / 2 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many analog signals can be multiplexed into the ADC. |
| Interface type | SPI (serial) | SPI (serial) | Both use a serial SPI interface, allowing direct drop-in compatibility with the same host controller. |
| Supply voltage (V) | 2.7 to 5.25 | 2.7 to 5.25 | Matching supply ranges ensure the parts can operate in the same power domain. |
| Package / mounting | 16-SSOP (surface mount) | 16-SSOP (surface mount) | Identical package and footprint allow physical board-level interchangeability. |
| Operating temperature range (°C) | -40 to +85 | -40 to +85 | Same temperature range means both suit the same environmental conditions. |
| Sampling rate (kSPS) | 125 | 200 | The ADS7841 offers a higher throughput, which matters for faster-sampling applications. |
| Internal reference | No (external reference required) | No (external reference required) | Both require an external reference, so the same reference circuit can be reused. |
| Power consumption (typical) | Lower (optimized for touch-screen use) | Higher (general-purpose ADC) | Power draw affects battery life and thermal budget in portable designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E/2K5 | ADS7841ES/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 125°C |
| Touchscreen | 4 Wire Resistive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 2.5 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E/2K5 is a 4-wire resistive touch screen controller with an integrated 12-bit ADC and on-chip drivers for touch panel excitation, while the ADS7841ES/2K5 is a standalone 12-bit, 4-channel successive-approximation ADC without touch screen drive circuitry. The ADS7843E/2K5 is supplied in a 16-pin SSOP package, and the ADS7841ES/2K5 is supplied in a 16-pin QSOP package.
No. Although both are 16-pin devices, they serve different functions: the ADS7843E/2K5 integrates touch screen control logic and panel drivers, whereas the ADS7841ES/2K5 is a general-purpose 4-channel ADC. Pin functions and package footprints differ, so they are not direct drop-in replacements.
Both devices use a 12-bit successive-approximation register (SAR) ADC architecture. The ADS7843E/2K5 provides 12-bit resolution for touch screen coordinate measurement, and the ADS7841ES/2K5 provides 12-bit resolution across its four analog input channels.
The ADS7843E/2K5 is designed for 4-wire resistive touch panels and drives the panel electrodes for X and Y coordinate measurement. The ADS7841ES/2K5 provides four analog input channels that can be configured as single-ended or differential pairs.
Both the ADS7843E/2K5 and ADS7841ES/2K5 operate from a single supply in the 2.7 V to 5.25 V range, supporting both 3 V and 5 V system designs.
Both devices communicate over an SPI-compatible serial interface, allowing connection to microcontrollers and DSPs with standard SPI or similar synchronous serial ports.
The ADS7843E/2K5 is offered in a 16-pin SSOP package, and the ADS7841ES/2K5 is offered in a 16-pin QSOP package. The /2K5 suffix indicates tape-and-reel packaging in quantities of 2,500 units.
For 4-wire resistive touch screen applications, the ADS7843E/2K5 is the appropriate choice because it integrates the panel drive and coordinate measurement functions. For general-purpose multi-channel analog signal acquisition, the ADS7841ES/2K5 is appropriate because it provides four configurable ADC input channels without touch screen-specific circuitry.