ADS7843E/2K5
Texas Dụng cụ
- Lifecycle
- Active
- Stock
- 2859 PCS
- Package
- SSOP-16
- Series
- Data Acquisition - Touch Screen Controllers
Bảng so sánh chi tiết giữa ADS7843E/2K5 và ADS7842EB cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS7843E/2K5 and ADS7842EB are not drop-in replacements for one another. The ADS7843E/2K5 is a 4-wire resistive touch screen controller with an SPI-compatible serial interface, while the ADS7842EB is a 4-channel 12-bit parallel-output successive-approximation ADC. Their differing interface architecture, channel configuration, package footprint, and control signaling make direct substitution impractical without a full board and firmware redesign.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E/2K5 | ADS7842EB | Why it matters |
|---|---|---|---|
| Resolution | 12 bit | 12 bit | Both are 12-bit devices, so conversion resolution is equivalent for touch or signal digitization accuracy. |
| Number of Input Channels | 4 (single-ended/differential touch channels) | 4 (single-ended) | Channel configuration affects whether the part can directly support 4-wire resistive touchscreen X/Y measurement versus general analog input multiplexing. |
| Interface Type | SPI (serial) | Parallel | The digital interface must match the host microcontroller or processor bus; SPI versus parallel is a major functional substitutability constraint. |
| Supply Voltage | 2.7 V to 5.25 V | 5 V (single supply) | Operating supply range determines compatibility with the system power rail and logic levels. |
| Package | SSOP-16 | SSOP-28 | Package footprint and pin count must match the PCB layout for a drop-in replacement. |
| Primary Application | 4-wire resistive touchscreen controller | General-purpose 4-channel ADC | The intended function differs; one integrates touchscreen control logic while the other is a general ADC, affecting direct substitutability. |
| Pin Count | 16 | 28 | Different pin counts mean the devices are not pin-compatible and cannot be interchanged on the same footprint. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent temperature ratings mean both suit the same industrial temperature environments. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E/2K5 | ADS7842EB |
|---|---|---|
| Supplier | - | Rochester Electronics, LLC |
| Part Status | Active | Active |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | Parallel |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Features | - | Selectable Address |
| Operating Temperature | -40°C ~ 85°C | -40°C ~ 85°C |
| Touchscreen | 4 Wire Resistive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 2.5 µA | - |
| Mounting Type | Surface Mount | - |
No. The ADS7843E/2K5 is a 4-wire resistive touch screen controller with a 12-bit SAR ADC and an SPI-compatible serial interface, while the ADS7842EB is a 4-channel, 12-bit parallel-output sampling ADC. They differ in function, interface, and package, so they are not direct substitutes.
Both devices use a 12-bit successive-approximation register (SAR) ADC architecture. The ADS7843E/2K5 provides 12-bit resolution for touch screen coordinate measurement, and the ADS7842EB provides 12-bit resolution across four analog input channels.
The ADS7843E/2K5 uses an SPI-compatible 3-wire serial interface for communication with a host controller. The ADS7842EB provides a parallel digital output interface, requiring multiple data lines plus control signals, which affects host pin count and PCB routing.
The ADS7843E/2K5 is supplied in a TSSOP package, while the ADS7842EB is supplied in an SSOP package. The different package types and pinouts mean the two devices are not footprint-compatible and cannot be dropped into the same PCB land pattern.
The ADS7843E/2K5 operates from a single supply in the 2.7 V to 5 V range, supporting both 3 V and 5 V systems. The ADS7842EB operates from a single 5 V supply. Designers should confirm exact limits against the respective manufacturer datasheets.
The ADS7843E/2K5 is intended for 4-wire resistive touch screen digitizer applications, handling pen position and pressure measurement. The ADS7842EB is a general-purpose 4-channel data acquisition ADC suited to multi-channel signal sampling rather than touch screen control.
No. The ADS7842EB lacks the touch screen drive and switching circuitry and the serial interface of the ADS7843E/2K5, so it cannot directly perform 4-wire resistive touch screen control. Any substitution would require substantial redesign and external circuitry.