ADS7843E vs ADS7841E/2K5G4

Bảng so sánh chi tiết giữa ADS7843E và ADS7841E/2K5G4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E and ADS7841E/2K5G4 are not functionally interchangeable despite sharing the same SSOP-16 footprint and 12-bit SAR architecture. The ADS7843E integrates a resistive touch-screen driver with an on-chip switch matrix and pen-interrupt output, whereas the ADS7841E/2K5G4 is a general-purpose 4-channel ADC without touch-screen control logic. Their serial interface timing, input configuration, and control-word formats differ, so a direct board-level swap is not supported without redesign.

Different input configuration Different control interface Different on-chip functions Different conversion timing

Parts at a glance

Part A

ADS7843E

Burr Brown

Lifecycle
Active
Stock
6691 PCS
Package
SSOP-16
Series
Data Acquisition - Touch Screen Controllers
Part B

ADS7841E/2K5G4

Texas Dụng cụ

Lifecycle
Active
Stock
5974 PCS
Package
SSOP-16
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E ADS7841E/2K5G4 Why it matters
Resolution 12-bit 12-bit Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability.
Number of Input Channels 4 (single-ended) / 2 (differential) 4 (single-ended) / 2 (differential) Channel count determines how many analog signals can be multiplexed into the ADC.
Interface Type SPI (serial) SPI (serial) Both use a serial SPI interface, allowing direct drop-in compatibility in most digital systems.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Matching supply ranges ensure the parts can operate in the same power domain.
Package / Mounting SSOP-16 (surface mount) SSOP-16 (surface mount) Identical package and footprint allow physical board-level substitution.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Same temperature range means both suit the same environmental conditions.
Sampling Rate 125 kSPS 200 kSPS Higher sampling rate in the ADS7841E allows faster signal acquisition, which may matter for high-speed applications.
Internal Reference External reference required External reference required Both require an external reference, so the same reference circuit can be reused.
Power Consumption Low power (approx. 500 µA at 5 V) Low power (approx. 500 µA at 5 V) Comparable power draw supports similar battery-powered or low-power designs.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E ADS7841E/2K5G4
Supplier - Texas Instruments
Part Status Active Obsolete
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 125°C
Touchscreen 3 Wire Capacitive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 280 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the primary functional differences between the ADS7843E and the ADS7841E/2K5G4?

The ADS7843E is a 4-wire resistive touch screen controller with an integrated 12-bit ADC and on-chip drivers for touch panel excitation, while the ADS7841E/2K5G4 is a standalone 12-bit, 4-channel successive-approximation ADC without touch screen drive circuitry. The ADS7843E includes an internal reference and switches for panel biasing, whereas the ADS7841E/2K5G4 requires an external reference voltage and provides a standard SPI-compatible serial interface for general-purpose analog signal acquisition.

Are the ADS7843E and ADS7841E/2K5G4 pin-compatible and can they be used as drop-in replacements for each other?

No. Although both devices are offered in similar small-outline packages, their pin functions differ. The ADS7843E dedicates pins to touch panel drive (X+, X-, Y+, Y-) and pen-interrupt output, while the ADS7841E/2K5G4 assigns those pins to additional analog input channels and reference connections. A direct drop-in replacement is not possible without PCB redesign and firmware changes.

Do both devices use the same serial interface protocol?

Both devices use a serial interface compatible with SPI, QSPI, and Microwire, but the command and data formats differ. The ADS7843E uses an 8-bit control byte to select channel, power-down mode, and reference configuration, returning a 12-bit conversion result. The ADS7841E/2K5G4 uses a different control byte format to select one of four input channels and returns a 12-bit result. Firmware written for one device is not directly portable to the other.

What are the resolution and sampling characteristics of each device?

Both the ADS7843E and the ADS7841E/2K5G4 provide 12-bit resolution. The ADS7843E is specified for a throughput rate of up to 125 kSPS when operating from a 2.7 V to 5 V supply. The ADS7841E/2K5G4 is specified for a 200 kSPS throughput rate. Exact timing and settling requirements should be confirmed against the respective manufacturer datasheets for the target supply voltage and reference configuration.

What supply voltage ranges do the ADS7843E and ADS7841E/2K5G4 support?

Both devices operate from a single supply in the range of 2.7 V to 5.25 V, making them suitable for 3 V and 5 V systems. The ADS7843E also includes an on-chip reference that is enabled or disabled via the control byte, while the ADS7841E/2K5G4 requires an external reference voltage applied to its VREF pin. Designers should verify the reference voltage limits and supply decoupling requirements in the respective datasheets.

Which device is appropriate for a resistive touch screen application versus a general-purpose analog input application?

The ADS7843E is purpose-built for 4-wire resistive touch screen digitizers, providing the panel drive switches, pen-interrupt detection, and ratiometric conversion needed for touch coordinate measurement. The ADS7841E/2K5G4 is a general-purpose 4-channel ADC suited to applications such as battery monitoring, sensor signal conditioning, and data acquisition where an external reference and multiple single-ended inputs are required. Selection should be based on whether touch panel drive circuitry is needed.

What package options are available for the ADS7843E and ADS7841E/2K5G4?

Both devices are commonly offered in 16-pin SSOP and 16-pin SOIC packages, depending on the specific orderable part number. The ADS7841E/2K5G4 suffix indicates a tape-and-reel packaging option in a specific package variant. Designers should confirm the exact package, pin count, and thermal characteristics from the manufacturer datasheet for the ordered part number before finalizing the PCB footprint.

Can the ADS7843E and ADS7841E/2K5G4 share the same external reference and power supply design?

Not directly. The ADS7843E can operate with its internal reference or an external reference, and its reference input is configured through the control byte. The ADS7841E/2K5G4 requires an external reference voltage on VREF and does not include an internal reference. Power supply decoupling and reference bypassing must be designed per each device's datasheet, and the reference source must meet the accuracy and drive requirements specified for the ADS7841E/2K5G4.