ADS7843E vs ADS7841ESG4

Bảng so sánh chi tiết giữa ADS7843E và ADS7841ESG4 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Not a drop-in replacement

The ADS7843E and ADS7841ESG4 are not functionally interchangeable despite sharing a similar 12-bit SAR architecture and 16-pin package family. The ADS7843E integrates a resistive touch-screen driver interface with differential channel switching, while the ADS7841ESG4 is a 4-channel single-ended ADC with a different serial control word and conversion timing. Pin functions, control register format, and analog input configuration differ, so a direct board-level swap is not supported without redesign.

Different input configuration Different control interface Different pin functions Different application role

Parts at a glance

Part A

ADS7843E

Burr Brown

Lifecycle
Active
Stock
6691 PCS
Package
SSOP-16
Series
Data Acquisition - Touch Screen Controllers
Part B

ADS7841ESG4

Texas Dụng cụ

Lifecycle
Active
Stock
5879 PCS
Package
SSOP-16
Series
Data Acquisition - Analog to Digital Converters (ADC)

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter ADS7843E ADS7841ESG4 Why it matters
Resolution 12-bit 12-bit Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability.
Number of Input Channels 4 (single-ended) / 2 (differential) 4 (single-ended) / 2 (differential) Channel count determines how many analog signals can be multiplexed into the ADC.
Interface Type SPI (serial) SPI (serial) Both use a serial SPI interface, allowing direct drop-in compatibility in most designs.
Supply Voltage Range 2.7 V to 5.25 V 2.7 V to 5.25 V Matching supply ranges ensure the parts can operate in the same power domain.
Package / Mounting 16-SSOP (Surface Mount) 16-SSOP (Surface Mount) Identical package and footprint allow physical board-level interchangeability.
Sampling Rate 125 kSPS 200 kSPS Higher sampling rate in the ADS7841ESG4 supports faster signal acquisition; a difference that may affect timing-critical designs.
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C Equivalent temperature ratings confirm suitability for the same environmental conditions.
Power Consumption (Typical) Low power (approx. 500 µA at 5 V) Low power (approx. 500 µA at 5 V) Similar power draw means no change to thermal or battery-life budgets.
Reference Input External reference External reference Both require an external reference, so the same reference circuit can be reused.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification ADS7843E ADS7841ESG4
Supplier - Texas Instruments
Part Status Active Discontinued at Digi-Key
Number of Bits - 12
Sampling Rate(Per Second) - 200k
Number of Inputs - 4
Input Type - Single Ended
Data Interface - SPI
Configuration - MUX-S/H-ADC
Ratio - S / H: ADC - 1:1
Number of A/D Converters - 1
Architecture - SAR
Reference Type - External
Voltage - Supply, Analog - 2.7V ~ 3.6V, 5V
Voltage - Supply, Digital - 2.7V ~ 3.6V, 5V
Operating Temperature -40°C ~ 85°C (TA) -40°C ~ 125°C
Touchscreen 3 Wire Capacitive -
Resolution(Bits) 12 b -
Interface Serial -
Voltage Reference External -
Voltage - Supply 2.7V ~ 5V -
Supply Current 280 µA -
Mounting Type Surface Mount -

Frequently asked questions

What are the primary functional differences between the ADS7843E and ADS7841ESG4?

The ADS7843E is a 4-wire resistive touch screen controller with an integrated 12-bit ADC and on-chip drivers for touch panel excitation, while the ADS7841ESG4 is a standalone 12-bit, 4-channel successive-approximation ADC without touch screen control logic or panel drivers. The ADS7843E is intended for touch digitizer applications, whereas the ADS7841ESG4 is a general-purpose 4-channel ADC.

Do the ADS7843E and ADS7841ESG4 have the same package and pinout?

No. The ADS7843E is offered in a 16-pin SSOP package, and the ADS7841ESG4 is offered in a 16-pin QSOP package. Although both are 16-pin devices, the pin functions differ because the ADS7843E includes touch panel drive and sense pins (X+, X-, Y+, Y-, and PENIRQ) that the ADS7841ESG4 does not have. They are not pin-for-pin compatible.

Can the ADS7843E be used as a direct drop-in replacement for the ADS7841ESG4?

No. The ADS7843E cannot be used as a direct drop-in replacement for the ADS7841ESG4. The ADS7843E is a touch screen controller with integrated panel drivers and a PENIRQ output, while the ADS7841ESG4 is a general-purpose 4-channel ADC. Their pin functions, package types, and control interfaces differ, so substitution requires design validation against the respective datasheets.

What is the resolution and sampling architecture of each device?

Both devices use a 12-bit successive-approximation register (SAR) ADC architecture. The ADS7843E provides 12-bit resolution for touch screen coordinate measurement, and the ADS7841ESG4 provides 12-bit resolution across its 4 analog input channels. Both are specified as 12-bit SAR converters in their respective manufacturer datasheets.

What are the analog input configurations of the ADS7843E and ADS7841ESG4?

The ADS7843E is configured for 4-wire resistive touch screen panels, with dedicated X+, X-, Y+, and Y- drive/sense lines and a PENIRQ interrupt output. The ADS7841ESG4 provides 4 single-ended analog input channels (CH0 through CH3) or 2 differential input pairs, selectable via its digital control interface. The input configuration is therefore application-specific and not interchangeable.

How do the digital interfaces of the ADS7843E and ADS7841ESG4 differ?

Both devices use a serial digital interface for control and data transfer. The ADS7843E uses a serial interface to command touch screen conversions and read coordinate data, and it provides a PENIRQ output to signal pen contact. The ADS7841ESG4 uses a serial interface to select input channels and read conversion results. The command sets and control word formats are device-specific and are not identical.

Are the ADS7843E and ADS7841ESG4 suitable for the same supply voltage range?

Both devices are specified for single-supply operation in the 2.7 V to 5.25 V range per their manufacturer datasheets. Designers should confirm the exact supply and reference conditions in the respective datasheet before finalizing a design, as performance specifications are defined under specific operating conditions.

Which device should be selected for a resistive touch screen design versus a general-purpose ADC design?

For a 4-wire resistive touch screen digitizer design, the ADS7843E is the appropriate choice because it integrates the panel drive and sense functions plus a pen-interrupt output. For general-purpose multi-channel analog signal acquisition, the ADS7841ESG4 is the appropriate choice because it provides 4 selectable input channels without touch screen-specific circuitry. Selection should be based on the verified requirements of the target application.