ADS7843E
Burr Brown
- Lifecycle
- Active
- Stock
- 6691 PCS
- Package
- SSOP-16
- Series
- Data Acquisition - Touch Screen Controllers
Bảng so sánh chi tiết giữa ADS7843E và ADS7841ES/2K5 cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.
Replacement verdict
The ADS7843E and ADS7841ES/2K5 are not functionally interchangeable despite sharing a similar SAR ADC architecture and package family. The ADS7843E is a 4-wire resistive touch screen controller with an on-chip switch driver and pen-interrupt output, while the ADS7841ES/2K5 is a general-purpose 4-channel 12-bit ADC without touch screen control logic. Their interface behavior, channel configuration, and application role differ fundamentally, so substituting one for the other requires a full circuit redesign rather than a direct swap.
Rows are prioritized by design impact. Highlighted values require attention during substitution.
Key electrical and mechanical differences between the two devices
| Parameter | ADS7843E | ADS7841ES/2K5 | Why it matters |
|---|---|---|---|
| Resolution | 12-bit | 12-bit | Both are 12-bit SAR ADCs, so resolution is equivalent for substitutability. |
| Number of Input Channels | 4 (single-ended) / 2 (differential) | 4 (single-ended) / 2 (differential) | Channel count determines how many analog signals can be multiplexed into the ADC. |
| Interface Type | SPI (serial) | SPI (serial) | Both use a serial SPI interface, allowing direct drop-in compatibility with the same host controller bus. |
| Supply Voltage Range | 2.7 V to 5.25 V | 2.7 V to 5.25 V | Matching supply ranges ensure the parts can operate in the same system power domain. |
| Package / Pin Count | 16-pin SSOP | 16-pin SSOP | Identical package and pin count enable board-level interchangeability without layout changes. |
| Operating Temperature Range | -40 °C to +85 °C | -40 °C to +85 °C | Equivalent temperature ratings confirm suitability for the same industrial environments. |
| Conversion Rate (max) | 125 kSPS | 200 kSPS | A higher sampling rate in the ADS7841ES/2K5 allows faster signal acquisition, which may matter for higher-bandwidth applications. |
| Internal Reference | No (external reference required) | No (external reference required) | Both require an external reference, so the same reference circuit can be reused. |
| Power Consumption (typical) | Low power (approx. 0.5 mW at 2.7 V) | Low power (approx. 0.9 mW at 5 V) | Power draw affects battery life and thermal budget in portable and embedded designs. |
Send your BOM and application constraints for technical and sourcing review.
Use manufacturer datasheets as the final authority.
| Specification | ADS7843E | ADS7841ES/2K5 |
|---|---|---|
| Supplier | - | Texas Instruments |
| Part Status | Active | Obsolete |
| Number of Bits | - | 12 |
| Sampling Rate(Per Second) | - | 200k |
| Number of Inputs | - | 4 |
| Input Type | - | Single Ended |
| Data Interface | - | SPI |
| Configuration | - | MUX-S/H-ADC |
| Ratio - S / H: ADC | - | 1:1 |
| Number of A/D Converters | - | 1 |
| Architecture | - | SAR |
| Reference Type | - | External |
| Voltage - Supply, Analog | - | 2.7V ~ 3.6V, 5V |
| Voltage - Supply, Digital | - | 2.7V ~ 3.6V, 5V |
| Operating Temperature | -40°C ~ 85°C (TA) | -40°C ~ 125°C |
| Touchscreen | 3 Wire Capacitive | - |
| Resolution(Bits) | 12 b | - |
| Interface | Serial | - |
| Voltage Reference | External | - |
| Voltage - Supply | 2.7V ~ 5V | - |
| Supply Current | 280 µA | - |
| Mounting Type | Surface Mount | - |
The ADS7843E is a 4-wire resistive touchscreen controller with an integrated 12-bit ADC and on-chip drivers for touchscreen panel excitation. The ADS7841ES/2K5 is a standalone 12-bit, 4-channel successive-approximation ADC with a serial interface, without integrated touchscreen drive circuitry. The ADS7843E is designed specifically for touchscreen digitizer applications, while the ADS7841ES/2K5 is a general-purpose ADC.
No. The ADS7843E is offered in a 16-pin SSOP package, while the ADS7841ES/2K5 is offered in a 16-pin SSOP package as well, but the pin functions differ because the ADS7843E includes touchscreen drive outputs (X+, X-, Y+, Y-) and a pen-interrupt output, whereas the ADS7841ES/2K5 provides four analog input channels (CH0–CH3) without touchscreen drive pins. Pin-to-pin substitution is not possible without verifying the pin function assignments in the respective datasheets.
No, not directly. The ADS7843E integrates the analog switches and drivers required to excite a 4-wire resistive touchscreen and includes a pen-interrupt output, while the ADS7841ES/2K5 lacks these touchscreen-specific functions. Replacing one with the other would require additional external circuitry and firmware changes, and the pin functions are not compatible.
Both devices provide 12-bit resolution. The ADS7843E supports a throughput rate of up to 125 kSPS. The ADS7841ES/2K5 supports a throughput rate of up to 200 kSPS. These figures should be confirmed against the specific manufacturer datasheet revision for the exact orderable part number.
Both devices operate from a single supply in the range of 2.7 V to 5.25 V, according to their respective manufacturer datasheets. Designers should verify the exact recommended operating conditions for the specific grade and package variant being used.
Both the ADS7843E and ADS7841ES/2K5 use a serial SPI-compatible interface for communication with a host microcontroller or processor. The ADS7843E additionally provides a pen-interrupt output to signal touch detection, which the ADS7841ES/2K5 does not provide.
No. The ADS7843E is intended for 4-wire resistive touchscreen digitizer applications, while the ADS7841ES/2K5 is a general-purpose 4-channel ADC suitable for data acquisition, industrial control, and sensor interface applications. Selection should be based on whether integrated touchscreen drive and pen-interrupt functions are required.