AM26LS32ACDR vs AM26LV32IDR

Bảng so sánh chi tiết giữa AM26LS32ACDR và AM26LV32IDR cung cấp những thông tin giá trị về thông số kỹ thuật và các tính năng chính của chúng. Chúng tôi đề cập chi tiết đến các yếu tố quan trọng, bao gồm tuân thủ RoHS, trạng thái REACH, dòng sản phẩm, kiểu lắp đặt, loại bao bì và các đặc điểm liên quan khác. Việc trình bày sự khác biệt cạnh nhau giúp đơn giản hóa việc lựa chọn linh kiện, giúp bạn dễ dàng chọn được tùy chọn tốt nhất cho ứng dụng cụ thể của mình.

Technical review by ETEI Component Engineering Source: manufacturer documentation

Replacement verdict

Compatible functional replacement candidate

The AM26LV32IDR and AM26LS32ACDR are both quad differential line receivers in the same SOIC-16 package with identical pinout, making the AM26LV32IDR a viable functional replacement candidate for the AM26LS32ACDR in 3.3 V systems. However, the AM26LV32IDR is a low-voltage device rated for 3.0 V to 3.6 V operation, while the AM26LS32ACDR is a 5 V device, so supply voltage compatibility must be confirmed before substitution. Designers must also validate fail-safe behavior and input common-mode range against the specific application requirements.

Supply Voltage Validation required
Package Type High match
Pin Configuration High match
Fail-Safe Behavior Validation required

Parts at a glance

Part A

AM26LS32ACDR

Texas Dụng cụ

Lifecycle
Active
Stock
2449 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers
Part B

AM26LV32IDR

Texas Dụng cụ

Lifecycle
Active
Stock
7519 PCS
Package
SOIC-16
Series
Interface - Drivers, Receivers, Transceivers

Key differences

Rows are prioritized by design impact. Highlighted values require attention during substitution.

Key electrical and mechanical differences between the two devices

Parameter AM26LV32IDR AM26LS32ACDR Why it matters
Supply Voltage (Vcc) 3.0 V to 3.6 V 4.75 V to 5.25 V The two devices operate on different supply rails (3.3 V vs 5 V), so they are not drop-in replacements without adjusting the system power supply.
Receiver Type Quad differential line receiver (RS-422/RS-485 compatible) Quad differential line receiver (RS-422/RS-423/RS-485 compatible) Both are quad differential receivers, but the AM26LS32A explicitly supports RS-423 single-ended signaling in addition to differential standards, broadening its interface compatibility.
Input Common-Mode Voltage Range -0.3 V to Vcc (approximately -0.3 V to 3.6 V) -7 V to +7 V The wider common-mode range of the AM26LS32A provides greater noise immunity and tolerance to ground potential differences in harsh industrial environments.
Maximum Data Rate 32 Mbps 10 Mbps The AM26LV32I supports higher signaling speeds, making it preferable for high-speed data links, while the AM26LS32A is adequate for lower-rate legacy interfaces.
Propagation Delay Typical 12 ns Typical 17 ns Lower propagation delay improves timing margins and supports higher data rates in synchronous communication systems.
Output Logic Compatibility 3.3 V LVTTL/LVCMOS compatible outputs 5 V TTL/CMOS compatible outputs Output levels must match the downstream logic family; mixing a 3.3 V receiver with 5 V logic (or vice versa) can cause level-mismatch and reliability issues.
Package SOIC-16 (D) SOIC-16 (D) Both use the same 16-pin SOIC footprint, so board layout and pin assignment are compatible even though electrical characteristics differ.
Operating Temperature Range -40 °C to +85 °C 0 °C to +70 °C The industrial temperature range of the AM26LV32I makes it suitable for extended-environment applications where the commercial-grade AM26LS32A may not be specified.
Number of Drivers/Receivers 0 drivers / 4 receivers 0 drivers / 4 receivers Both are quad receivers with no integrated drivers, so channel count and functional role in a bus system are equivalent.

Need help validating a replacement?

Send your BOM and application constraints for technical and sourcing review.

Full specification comparison

Use manufacturer datasheets as the final authority.

Specification AM26LS32ACDR AM26LV32IDR
Part Status Active Active
Type Receiver Receiver
Protocol RS422, RS423 RS422, RS485
Number of Drivers/Receivers 0/4 0/4
Receiver Hysteresis 50 mV 50 mV
Voltage - Supply 4.75V ~ 5.25V 3V ~ 3.6V
Operating Temperature 0°C ~ 70°C -40°C ~ 85°C
Mounting Type Surface Mount Surface Mount

Frequently asked questions

What are the primary functional differences between the AM26LV32IDR and the AM26LS32ACDR?

Both devices are quad differential line receivers. The AM26LV32IDR is a low-voltage (3.3 V) device, while the AM26LS32ACDR operates from a 5 V supply. The AM26LV32IDR features a wider common-mode input range of -0.3 V to 5.5 V and is designed for 3.3 V systems, whereas the AM26LS32ACDR has a common-mode range of -7 V to 7 V and is intended for 5 V systems.

Are the AM26LV32IDR and AM26LS32ACDR pin-to-pin compatible?

Yes, both devices are offered in the same 16-pin SOIC (D) package with identical pin functions, allowing them to share the same PCB footprint. However, the supply voltage difference must be considered before substituting one for the other.

What supply voltage does each device require?

The AM26LV32IDR operates from a single 3.3 V supply (typically 3.0 V to 3.6 V). The AM26LS32ACDR operates from a single 5 V supply (typically 4.75 V to 5.25 V).

Do both devices support the same data signaling standards?

Both are designed for balanced differential data transmission. The AM26LV32IDR is optimized for low-voltage differential signaling in 3.3 V systems, while the AM26LS32ACDR is a standard 5 V differential line receiver suitable for RS-422/RS-423-type balanced interfaces. Designers should confirm the specific signaling standard required by the system.

What is the common-mode input voltage range for each part?

The AM26LV32IDR specifies a common-mode input voltage range of -0.3 V to 5.5 V. The AM26LS32ACDR specifies a common-mode input voltage range of -7 V to 7 V, providing greater tolerance for ground potential differences in 5 V systems.

Can the AM26LV32IDR be used as a drop-in replacement for the AM26LS32ACDR in an existing 5 V design?

No. The AM26LV32IDR is a 3.3 V device and is not rated for 5 V supply operation. Substituting it into a 5 V design would exceed its supply rating and is not supported by the manufacturer's datasheet.

What are the operating temperature ranges for these devices?

Both the AM26LV32IDR and AM26LS32ACDR are specified for the industrial temperature range of -40°C to 85°C, as stated in their respective manufacturer datasheets.