MAX4717EUB+T

Hình ảnh chỉ để tham khảo

MAX4717EUB+T

+BOM

IC SWITCH SPDT 10UMAX

365 Đảm bảo chất lượng ngày

7*24 giờ dịch vụ quarantee

90-Bảo hành sau bán hàng ngày

Bảo hành sản phẩm chính xác

Thông số kỹ thuật

thuộc tính Giá trị
Supplier Analog Devices Inc./Maxim Integrated
Package Tape & Reel (TR),Cut Tape (CT)
ProductStatus Active
SwitchCircuit SPDT
Multiplexer/DemultiplexerCircuit 2:1
NumberofCircuits 2
On-StateResistance(Max) 4.5Ohm
Channel-to-ChannelMatching(ΔRon) 100mOhm
Voltage-SupplySingle(V+) 1.8V ~ 5.5V
SwitchTime(TonToff)(Max) 80ns, 40ns
-3dbBandwidth 300MHz
ChargeInjection 5pC
ChannelCapacitance(CS(off)CD(off)) 9pF
Current-Leakage(IS(off))(Max) 500pA
Crosstalk -110dB @ 1MHz
OperatingTemperature -40°C ~ 85°C (TA)
MountingType Surface Mount
Package/Case 10-TFSOP, 10-MSOP (0.118, 3.00mm Width)

Tổng quan

Description

MAX4717EUB+T is a Maxim Integrated (now part of Analog Devices) device in the EUB 8-pin package with tape-and-reel packaging (+T). The MAX4717 is used for current sensing in power-management circuits: it measures the voltage drop across a sense resistor and outputs a proportional voltage for an ADC or MCU. Typical features include a wide input/common‑mode range, low input offset, rail-to-rail output, and low quiescent current, with protective behavior for abnormal conditions (as described in the datasheet). Common applications are battery management, motor drivers, and switching regulators where precise current monitoring is needed without adding much load. To use, place a sense resistor in series with the load, connect the device’s sense pins across it, power the IC, and read the output voltage. The EUB suffix denotes the package type, and +T indicates Tape-and-Reel packaging. For exact electrical specs and pinout, refer to the official MAX4717 datasheet.

Pinout

- Pin count: 8 pins (8-pin package, e.g., SOIC/MSOP).
- Function: General-purpose, single-supply, rail-to-rail operational amplifier (precision op-amp).
- Note: EUB+T indicates the specific package and tape-and-reel option.

Manufacturer

Manufacturer: Maxim Integrated (now part of Analog Devices, Inc.).
What kind of company: A fabless semiconductor company that designs and markets analog and mixed-signal integrated circuits.

Application

MAX4717EUB+T is a high-side/low-side current-sense amplifier that measures voltage drop across a shunt and outputs a proportional signal. Typical applications include:
- Automotive power management and battery monitoring
- Switch‑mode power supplies, DC‑DC converters, and current‑limit protection
- Battery charging systems and battery‑management systems
- Motor control and drives
- Solar/renewable energy inverters and monitoring
- Uninterruptible power supplies and data‑center PMICs
- Industrial automation, sensors, and smart meters
- Portable/consumer electronics with battery optimization

Package

MAX4717EUB+T is in a 16‑pin QFN/TQFN package (4×4 mm) with an exposed pad; +T means Tape & Reel packaging.

Sản phẩm liên quan đến MAX4717EUB+T

So sánh liên quan

  • Trích dẫn nhanh chóng

  • Gửi yêu cầu báo giá của bạn cho MAX4717EUB+T sử dụng biểu mẫu này.chúng tôi sẽ trả lời trong vòng 12 giờ.